Need help?Do you have a question about the Kikusui PLZ664WA and is the answer not in the manual?
General| Model | PLZ664WA |
|---|---|
| Type | Electronic Load |
| Output Power | 660W |
| Storage Temperature | -20 to 70°C |
| Load Modes | CC, CV |
| Communication Interface | GPIB, RS-232C, USB |
| Voltage Accuracy | ±0.05% |
| Load Regulation | 0.01% |
| Line Regulation | 0.01% |
| Operating Temperature | 0 to 40°C |
Highlights key features such as high-speed slew rate, variable slew rate, higher precision, operability, 0 V input, and sequence function.
Details environmental and location precautions for installing the unit safely and optimally.
Explains the correct procedure for connecting the power cord, including voltage and frequency considerations.
Emphasizes the importance of proper grounding for safety and to prevent malfunctions due to noise.
Describes the step-by-step procedure for powering on the electronic load unit and performing a basic check.
Details precautions and procedures for correctly connecting load wires, including electrical wire usage and inductance considerations.
Provides detailed procedures for turning the load on and off, including related functions like auto load off.
Explains various protection functions (OCP, OVP, OPP, OHP, UVP, REV) that safeguard the unit and connected equipment.
Guides users on how to set trip points for OCP, OPP, and UVP to configure protection mechanisms.
Explains how to set and operate the Constant Current (CC) mode, including current range and value settings.
Details the operation of the Constant Resistance (CR) mode, focusing on setting conductance and related parameters.
Covers the operation of the Constant Voltage (CV) mode, including setting voltage values and ranges.
Introduces the sequence function for automatically executing pre-defined operations and waveform simulations.
Details methods for controlling the PLZ-4W externally using voltage, resistance, or contact signals via interfaces.
Covers parallel operation methods to increase capacity, including using the same model or load boosters.
Explains the importance of periodic calibration and outlines the calibrated items and overview of the process.
Lists common malfunctions, their possible causes, and suggested remedies for troubleshooting the PLZ-4W unit.
Lists detailed electrical specifications for the PLZ-4W Series, including current, power, operating ranges, and accuracy.
To Next Page
