To Next PageTo Next Page
Need help?Do you have a question about the Kikusui PCR500LE and is the answer not in the manual?
General| Rated output capacity | 500 VA |
|---|---|
| Output Power | 500 W |
| Weight | Approx. 8 kg |
| Output Voltage | 0-300 V |
| Output Voltage Range | 0 to 300 V |
| Output Current | 5 A |
| Ripple Voltage | 0.3 Vrms |
| Line Regulation | 0.1% or less |
| Ripple and Noise (voltage) | 0.3 Vrms |
| Input Voltage | 100-240 VAC |
| Input Frequency | 50/60 Hz |
| Communication Interface | USB, GPIB |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20-70°C |
| Dimensions (W × H × D) | 215 × 132 × 370 mm |
Describes front and rear panel controls and connections.
Covers output mode, voltage, frequency, and on/off operations.
Setting operational limits and protection mechanisms.
Storing and recalling settings via internal or USB memory.
Synchronizes output and compensates for voltage drops.
Creates sequences and simulates power line abnormalities.
Analyzes harmonics, generates custom waveforms, and controls via external signals.
Electrical and physical specs of the main unit.
Dimensional drawings of the product series.
Defines technical terms and shows performance data.
Restoring settings and product upkeep procedures.
Addresses problems, alarms, and error messages.
