STEP 5 :
Align the seat plate to the bottom of the seat cushion, make
sure that the front of the seat plate is facing the front of the seat cushion.
Attach the seat plate to the seat cushion using four M8X25mm bolts,
tighten all the bolts with the wrench.
I
3
STEP 6 :
Insert the footrest to the pre-drilled holes underneath the seat
cushion, then put the rubber rings at the end of pole.
M
L
E-mail: service@killabee-gaming.com Web: www.killabee-gaming.com
7
front
ASSEMBLY INSTRUCTIONS
To Next Page
Loading...
