STEP 7:
Turn the seat cushion upright and align the center hole of the
seat plate over the lift, then push the seat cushion down onto the lift
rmly until the connection is secure.
STEP 8:
Using Adjusters to attach Seat Cushion and Back Cushion,
align the adjusters over the pre-drilled holes underneath the seat cushion
and back cushion with M8x25mm Bolts, tighten all the bolts with the
wrench.
G
KK
3
4
Note: Please tighten the Bolts to 50%, not 100%.
RightLeft
E-mail: service@killabee-gaming.com Web: www.killabee-gaming.com
8
ASSEMBLY INSTRUCTIONS
To Next Page
Loading...
