KILLABEE 8247 - Connecting Seat to Base and Attaching Adjusters

STEP 7:
Turn the seat cushion upright and align the center hole of the
seat plate over the lift, then push the seat cushion down onto the lift
rmly until the connection is secure.
STEP 8:
Using Adjusters to attach Seat Cushion, align the adjusters
over the pre-drilled holes underneath the seat cushion with M8x25mm
Bolts, tighten all the bolts with the wrench.
G
KK
3
4
Note: Note: Please tighten the Bolts to 50%, not 100%.
RightLeft
E-mail: service@killabee.net Web: www.killabee-gaming.com
8
ASSEMBLY INSTRUCTIONS