How to release high voltage in KiloVault HAB Camera Accessories?
To release high voltage in KiloVault Camera Accessories, ensure the voltage is under the release voltage (54.4V±0.5V) for 1 second.
What is the low voltage alarm for total voltage in KiloVault HAB Camera Accessories?
The low voltage alarm for total voltage in KiloVault Camera Accessories is triggered at 48.0V±0.5V.
What is the low voltage release for each cell in KiloVault Camera Accessories?
The low voltage release for each cell in KiloVault Camera Accessories is 3.10±0.03V.
How does over current release method work in KiloVault Camera Accessories?
The KiloVault Camera Accessories will automatically release after 1 minute if the over current release method is triggered.
What is the low voltage alarm for each cell in KiloVault HAB Camera Accessories?
The low voltage alarm for each cell in KiloVault Camera Accessories is triggered at 3.00±0.03V.
What is the high voltage release for each cell in KiloVault Camera Accessories?
The high voltage release for each cell in KiloVault Camera Accessories is 3.40±0.03V.
What is the discharge over current protection for KiloVault HAB Camera Accessories?
The discharge over current protection for KiloVault Camera Accessories is 180±10A with a delay time of 1 second.
What is the charge over current protection for KiloVault HAB?
The charge over current protection for KiloVault Camera Accessories is 180±5A with a delay time of 5 seconds.
What is the high voltage alarm for total voltage in KiloVault HAB Camera Accessories?
The high voltage alarm for total voltage in KiloVault Camera Accessories is triggered at 56.8V±0.5V.
What is the high voltage alarm for each cell in KiloVault HAB?
The high voltage alarm for each cell in KiloVault Camera Accessories is triggered at 3.55±0.03V.
General| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
|---|---|
| Self-Discharge Rate | <3% per month |
| Battery Type | Lithium Iron Phosphate (LiFePO4) |
| Terminal Type | M8 |
| Recharge Time | 4-6 hours (with recommended charger) |
Explains warning symbols and outlines general safety precautions for battery handling and installation.
Covers safe transportation, storage, emergency procedures, and qualified personnel for battery systems.
Highlights the key features, design aspects, and capabilities of the KiloVault HAB V4 system.
Details electrical parameters, operating environment limits, and temperature specifications for the battery.
Outlines physical dimensions, weight, ingress ratings, and product certifications.
Covers installation flowchart, unpacking, package contents, and required tools/materials.
Specifies suitable installation locations, wall mounting plate details, and surface requirements.
Guides on connecting the KiloVault HAB V4 to the inverter, including wiring diagrams and specific steps.
Explains the control panel display, indicators, and the process for calibrating the battery's SoC.
Details recommended charging parameters, settings for different chargers, and procedures for updating firmware.
Guides on starting the system for the first time and methods for monitoring performance via panel or app.
Covers basic maintenance procedures and guidelines for the proper disposal of the battery unit.
Lists alarm/protection conditions, their trigger values, and methods for release or recovery.
Details the meaning of various display indicators (HV, LV, HT, LT, OC, SC) and their required actions.
Addresses common problems and solutions for units connected in parallel, including communication and voltage differences.
Explains how to reset the unit, recalibrate the SoC, and address low unboxed voltage issues.
Provides information on downloading manuals, software, and accessing online resources for support.
Lists contact details for KiloVault support, including email and phone number.
To Next Page
