To Next Page
D
Dennis JohnsonAug 27, 2025
What is the low voltage protection for total voltage in KiloVault HAB?
- AAndrew BallAug 27, 2025
KiloVault Camera Accessories provides low voltage protection for total voltage at 43.2V±0.5V with a delay time of 1 second.
What is the low voltage protection for total voltage in KiloVault HAB?
KiloVault Camera Accessories provides low voltage protection for total voltage at 43.2V±0.5V with a delay time of 1 second.
What is the high voltage protection for total voltage in KiloVault Camera Accessories?
KiloVault Camera Accessories provides high voltage protection for total voltage at 60.0V±0.5V with a delay time of 1 second.
What is the low voltage protection for each cell in KiloVault Camera Accessories?
KiloVault Camera Accessories provides low voltage protection for each cell at 2.70±0.03V with a delay time of 1 second.
What is the high voltage protection for each cell in KiloVault Camera Accessories?
KiloVault Camera Accessories provides high voltage protection for each cell at 3.75±0.03V with a delay time of 1 second.
How does charge over current release method work in KiloVault HAB Camera Accessories?
The KiloVault Camera Accessories will automatically release a charge over current after 1 minute.
General| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
|---|---|
| Self-Discharge Rate | <3% per month |
| Battery Type | Lithium Iron Phosphate (LiFePO4) |
| Terminal Type | M8 |
| Recharge Time | 4-6 hours (with recommended charger) |
Explains warning symbols and outlines general safety precautions for battery handling and installation.
Covers safe transportation, storage, emergency procedures, and qualified personnel for battery systems.
Highlights the key features, design aspects, and capabilities of the KiloVault HAB V4 system.
Details electrical parameters, operating environment limits, and temperature specifications for the battery.
Outlines physical dimensions, weight, ingress ratings, and product certifications.
Covers installation flowchart, unpacking, package contents, and required tools/materials.
Specifies suitable installation locations, wall mounting plate details, and surface requirements.
Guides on connecting the KiloVault HAB V4 to the inverter, including wiring diagrams and specific steps.
Explains the control panel display, indicators, and the process for calibrating the battery's SoC.
Details recommended charging parameters, settings for different chargers, and procedures for updating firmware.
Guides on starting the system for the first time and methods for monitoring performance via panel or app.
Covers basic maintenance procedures and guidelines for the proper disposal of the battery unit.
Lists alarm/protection conditions, their trigger values, and methods for release or recovery.
Details the meaning of various display indicators (HV, LV, HT, LT, OC, SC) and their required actions.
Addresses common problems and solutions for units connected in parallel, including communication and voltage differences.
Explains how to reset the unit, recalibrate the SoC, and address low unboxed voltage issues.
Provides information on downloading manuals, software, and accessing online resources for support.
Lists contact details for KiloVault support, including email and phone number.
