13
9.2 Update device firmware
Method 1: Update from the Web UI.
Login to the web page of E3, click "Settings">” System setting”>"Firmware Upgrade" to check if there is any
latest firmware available to download. If yes, select the downloaded firmware and click “Firmware update”.
After uploading the firmware successfully, it needs to reboot the device. After clicking “OK”, the device will
be restarted, please be patient.
Method 2
：
Update in Recovery mode
There are three buttons on the LCD including Left, Right and OK button. If you cannot access the E3 web UI,
connect the power supply and wait for the KILOVIEW logo to be shown on the LCD, press and hold
button for 10s to enter the recovery mode.
Step 1: Copy the firmware file downloaded from Kiloview website to a USB flash drive.
Step 2: Insert the USB flash drive into the E3, after the device is turned on (about 2s), wait for the Kiloview
logo to appear on the screen, long press and hold for more than 10s until the device enters recovery
mode.
To Next Page
Loading...
Need help?
General
