Need help?Do you have a question about the Kiloview E2 Series and is the answer not in the manual?
General| Video Input | HDMI |
|---|---|
| Audio Input | HDMI, 3G-SDI |
| Audio Encoding | AAC |
| IP Output Protocols | RTMP, RTSP, SRT |
| Control | Web GUI |
| Power Supply | DC 12V |
| Network Interface | 10/100/1000M Ethernet |
| Bit Depth | 8-bit |
| Color Space | YUV 4:2:0 |
| Storage Temperature | -20°C to 60°C |
Introduction to E series wired video encoders, covering SDI or HDMI input and IP stream compression.
Highlights key features like high bandwidth adaptability, low latency, and dual stream output for E series encoders.
Details the technical specifications and parameters for E series wired video encoders.
Introduction to G series wireless video encoders, supporting SDI or HDMI input and IP stream transmission.
Lists the advantages of G series wireless encoders, including built-in WIFI and powerful streaming functions.
Provides the technical specifications and parameters for G series wireless video encoders.
Introduction to M2 wired video encoders, supporting VGA/HDMI input and IP stream for transmission.
Details the advantages of M2 wired video encoders, such as dual interface design and continuous working.
Lists the technical specifications and parameters for M2 wired video encoders.
Introduction to 1U rack-mounted video encoders for integrated SDI/HDMI encoding and transmission.
Outlines the benefits of 1U rack-mounted encoders, including high integration and low power consumption.
Provides the technical specifications and parameters for 1U series rack-mounted video encoders.
Instructions on how to install and connect the device, including power and video input.
Guidance on setting up network manually via wired connection or using the device's WIFI hotspot.
Explanation of how to pull RTSP streams using decoders or PC players like VLC.
Information on configuring the device to push video streams using protocols like RTMP, RTMPS, UDP, HLS.
Lists the items included in the E/G/M series and 1U rack series packing.
Details the interfaces for various KILOVIEW encoder series.
Steps for installing and connecting E/G series encoders, starting with the power adapter.
Instructions on connecting the DC 12V power adapter to the encoder for operation.
Guidance on connecting SDI/HDMI signal from the source to the encoder's input port.
Instructions for connecting the encoder to a network switch or computer via Ethernet.
Steps to connect the WIFI antenna to the device for wireless functionality.
Steps for installing and connecting M2 series encoders, starting with the power adapter.
Instructions on connecting the DC 12V power adapter to the M2 encoder.
Guidance on connecting VGA/HDMI signal from the source to the M2 encoder's input.
Instructions for connecting the M2 encoder to a network via Ethernet.
Steps for installing and connecting 1U series rack-mounted encoders, starting with the power adapter.
Instructions on connecting the AC 220V power adapter to the 1U series encoder.
Guidance on connecting SDI/HDMI signals from the source to the 1U series encoder inputs.
Instructions for connecting the 1U series encoder to a network via Ethernet.
Guide to logging into the encoder's web interface via Ethernet connection.
Instructions for logging into G series encoders using their default WIFI hotspot.
Overview of network configuration options including Ethernet, WiFi, and 4G.
Configuration settings for the Ethernet connection, including IP address and DHCP.
Detailed configuration for WIFI networks, including default and shared hotspot modes.
Configuration steps for using a USB 4G network card with G series encoders.
Details on using the 'Local Link' and 'Easy Management' service for device access.
Guide on downloading and using the Android APP for device management.
Overview of the device's current status, audio/video streams, and system information.
Access to basic configuration options for the device.
Instructions on how to change the default WEB login password for security.
Steps to set the device's location, time zone, and synchronize time.
Methods for restoring the device to its original factory default settings.
Guide on performing online firmware upgrades for the device.
Covers video source selection and audio signal source configuration.
How to select video sources and adjust brightness, contrast, saturation, and hue.
Steps for cropping, scaling, and rotating video before encoding.
How to select the audio source and adjust analog audio gain.
Configuration of audio encoding parameters and general stream settings.
Configuration of audio encoding parameters like codec, sampling, and bitrate.
Settings for video encoding, focusing on H.264 main stream parameters.
Overview of supported streaming services like RTSP, RTMP, HLS, TS-UDP, SRT.
Configuration and behavior of the Motion JPEG streaming output.
Details on setting up and accessing the RTSP streaming service.
Instructions for setting up RTMP pushing for live streaming to platforms like YouTube.
Configuration for TS-UDP pushing, covering unicast and multicast modes.
Steps for enabling and configuring the HLS streaming service.
Guide to setting up SRT-TS pushing, including parameters and handshake modes.
How to configure recording parameters like format, file limitation, and overwrite settings.
Managing NAS connections and viewing mounted storage status.
How to upload and manage images for overlay on the video stream.
Enabling and configuring text, time, and image overlays on the video.
Detailed settings for adding text and time overlays, including position and font.
Configuration of the web service port for accessing the device interface.
How to enable and configure the ONVIF service for security system integration.
Settings for enabling or disabling the Telnet service for remote debugging.
Configuration of serial ports using USB to Serial adapters for device communication.
How to configure PTZ camera control settings and speeds.
Using the web interface control panel for PTZ camera movement and zoom.
How to perform a quick reset of the video encoding service.
Instructions on how to restart the device software.
Steps to save current device configurations as presets for backup or transfer.
Managing and loading saved preset configurations onto the device.
To Next Page
