Kiloview E2 Series User Manual

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
7
1.4 1U series rack-mounted video encoder
The rack-mounted encoder refers to an integrated single, quad or multi-channel SDI/HDMI video
encoding module in a 1U/3U rack-mount frame through plug-in card. Through wired network to realize
remote video transmission / live broadcast.
1.4.1
Advantages
 Highly integrated, low power consumption, stable operation
 It can integrate 1U single-channel, 1U four-channels, or 3U multi-channels SDI/ HDMI video
encoding module, and supports up to 32-channels in 3U rack. SDI encoding module and HDMI
encoding module can be integrated into the same rack for customization;
 Advanced low-power consumption design (150w only for 32 channels at full load), together with
built-in intelligent cooling device, it can ensure stable operation, makes 24h continuous working
available.
 High bandwidth adaptability, it can transmit high-definition, low-latency image without padding
even under a low-bandwidth network environment
 With branded chips solution together with video dynamic noise reduction and image enhancement
technology, it can realize good encoding image under low bit transmission;
 Good video image can be achieved at 1Mbps@720p, 1.5Mbps@1080p network. In the normal
scene, 1Mbps@720p, 1.5Mbps@1080p can get high quality video quality;
 Advanced video buffering technology and FEC technology ensures video encoding delay ≤67ms and
transmission stable without non-padding.
 Adjustable bit rate from 64kbit/s～40Mbit/s.
Note: (≤67ms) refers to the delay of the encoder end, and the end-to-end delay also relates to
network, decoding, etc.

Kiloview E2 Series Specifications

General

Brand	Kiloview
Model	E2 Series
Category	Media Converter
Language	English