Version 1.1 © Changsha KILOVIEW Electronics CO., LTD. All rights reserved
HD Video Encoders · User Manual
6.9.2 PTZ Setting
The encoder can control the PTZ camera via Sony Visca, Pelco-D, Pelco-P protocols; you can also set the
control speed.
6.9.3 Control Panel
Through the web page of the encoder, you can control the movement, zoom and focus of the camera in
all directions.
6.10 Quick Reset and Reboot
6.10.1 Quick Reset
"Quick Reset" is used to quickly reset the video encoding service of the encoder, normally it’s used to
parameters come into force after modification or encoding abnormal, the current encoding service will
be stopped and it will take about 3 seconds.
To Next Page
Loading...
Need help?
General
