Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
4.3.2 Connecting video signal
Connect the SDI/HDMI signal from the source (such as a camera) to the SDI/HDMI input port of the
device via a cable.
Note: HDMI and SDI device interface input and loop position is different. It is subject to the actual
device.
4.3.3 Connect network
Connect one end of the network cable to the encoder Ethernet port.The other end is connected to the
network switch or the computer's Ethernet port.
To Next Page
Loading...
Need help?
General
