Kiloview E2 Series User Manual

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
15
4.2.2 Connecting video signal
Connect the VGA/HDMI signal from the source (such as a camera) to the SDI/HDMI input port of the
device via a cable.
4.2.3 Connect network
Connect one end of the network cable to the encoder Ethernet port. The other end is connected to the
network switch or the computer's Ethernet port.
4.3 1U series installation and connection
4.3.1 Connect the power adapter
Using the power adapter (AC 220V) connect to the main product, after the power is turned on, then the
product starts working immediately.
Note: Please use the standard power adapter provided. Using other unqualified power supplies
may damage the device.

Kiloview E2 Series Specifications

General

Brand	Kiloview
Model	E2 Series
Category	Media Converter
Language	English