Version 1.1 © Changsha KILOVIEW Electronics CO., LTD. All rights reserved
HD Video Encoders · User Manual
Note: Below format is the reference delay value under different packet loss. When RTT
＞20ms, it requires to increase the delay appropriately.
4) Save the settings, then a SRT-TS pushing address will be added. The encoder starts to initiate a
handshake connection to the receiving port.
6.5 Local recording
Encoders support local recording function. Encoder with TF card-slot can support TF recording and
meanwhile it supports USB disk inserted into USB port of encoder for recording. The recording
operation is as follows:
1) Click “Record” below “H.264 Main Stream” under “Dashboard” or “Encoding and stream setting”.
Network highest
packet loss rate (%)
RTT Multiplier BW Overhead The lowest SRT delay
(when RTT≤20ms)
≤1
3 33 60
≤3
4 25 80
≤7
5 20 100
≤10
6 17 120
To Next Page
Loading...
Need help?
General
