Kiloview E2 Series User Manual

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
13
3.3 LED indicator descriptions
E/G/M/1U LED indicator status
4 Installation and Connection
4.1 E/G series installation and connection
4.1.1 Connect the power adapter
Using the power adapter (DC 12v) connect to the main product, after the power is turned on, then the
product starts working immediately.
Note: Please use the standard power adapter provided. Using other unqualified power supplies
may damage the device.
Name Color Status Description
POWER
Red
Always on Power supply is connected
Flashing Power failure
Off Power supply is not connected
SIGNAL
Green
Always on SDI/HDMI signal is connected
Flashing Restore device to factory settings
Off SDI/HDMI signal is not connected
RUN
Green
Always on Device is starting
Flashing Restore device to factory settings
Off Working abnormal/not started

Kiloview E2 Series Specifications

General

Brand	Kiloview
Model	E2 Series
Category	Media Converter
Language	English