Need help?Do you have a question about the Kilsen KL731A and is the answer not in the manual?
General| Model | KL731A |
|---|---|
| Type | PIR Detector |
| Power Supply | 12V DC |
| Operating Temperature | -10°C to +50°C |
| Output | NC/NO |
General guidelines for system planning, design, installation, commissioning, use, and maintenance.
Instructions for inserting the detector head into the mounting base and securing it.
Procedure for removing a locked detector by inserting a screwdriver into the locking tab slot.
Details the requirement for a unique numeric address (1-125) for each device.
Basic maintenance involves yearly inspection; avoid modifying internal wiring or circuitry.
Steps for replacing the optical chamber in KL731A detectors, including cover removal.
Provides technical specifications for KL710A, KL731A, and KL735A detectors.
Lists certification details and compliance standards for the detectors.
To Next Page
