38
Introduction
Daily use
KIMAX2
Menu
Configuration
Calibration
Protecting
calibration
Electrical
installation
Sensor
installation
Additional
information
Additional information
How to build Kimax 2 Radio in:
Kimax 2 Radio is designed to fit directly into one of your free DIN radio slots. Your kit contains
a mounting frame which can be placed in your free DIN radio slot when no frame is present
already.
Connect the cable set to the electrical circuit on the vehicle and connect the Kimax 2 Radio to
the cable set connector before you snap it in into the frame.
In order to replace the Kimax 2 Radio, you need to use the two belonging forks for releasing
the snaps before you can pull the instrument out of the frame.
To Next Page
Loading...