39
Introduction
Daily use
KIMAX2
Menu
Configuration
Calibration
Protecting
calibration
Electrical
installation
Sensor
installation
Additional
information
Technical specification Kimax 2 Radio:
Su
l
volta
e 10 ... 30 Volt direct current
Current consum
tion max. 90 mA
Alarm 1 Flashin
dis
la
Alarm 2 Output open collector NPN
max. 0.2 A/ 50 VDC
Display Three-digits 7-segment LED,
character hei
ht 20.3 mm
Measuring accuracy ±2 % of maximum load
at 0 °C - +50 °C
Air connection Quick release connection,
6 mm hose
Maximum
ressure 15.5 bar
225
si
Operating pressure range 0 to 10.5 bar
0 to 150
si
SG Senso
0-20 mA in
ut
Printer RS-232 serial
On-Board Com
ute
RS-232 serial
Device bus Power line communication
O
eratin
tem
erature -25 °C...+70 °C
Stora
e tem
erature -40 °C...+70 °C
Dimensions
DIN format
182 x 53 x 75 mm
Wei
ht a
rox. 550
A
roval CE and E1
The policy of Sense-Tech Weighing Systems ApS is to continually improve our products. This means that product specifications may
change without prior notice.
Find additional technical information on www.kimax.com.
Tools and parts you may need for proper installation:
Gluing Set STWS part no 10139
T-piece 8 - 6 - 8 mm STWS part no 43002
T-piece 9 - 6 - 9 mm STWS part no 43019
T-piece 3/8” - 6 mm - 3/8” STWS part no 43020
Angle fitting 6 mm STWS part no 43001
4 mm throttles for 6 mm Polyurethane (PU) or Polyamid (PA) hose STWS part no 43004
6 mm Polyurethane (PU) or Polyamide (PA) hose
10 bar manometer with 6 mm tubing
Manual air pump
Hose cutting knife
Cable strips
Examples of typically used sets:
Kimax 2 Radio 2 Air + 2 Air + 2 Air
Part number 032220-0131
1 x display unit, cabin
1 x mounting frame + connection cable
6 x angle fittings
6 x air pressure throttle dia. 6mm
6 x T-fittings dia. 8mm / 6mm / 8mm
Kimax 2 Radio 1 SG + 2 Air + 2 Air
Part number 033220-01D1
1 x display unit, cabin
1 x mounting frame + connection cable
4 x angle fittings
4 x air pressure throttle dia. 6mm
4 x T-fittings dia. 8mm / 6mm / 8mm
Kimax 2 Radio 1 SG + 2 SG
Part number 033400-01E0
1 x display unit, cabin
1 x mounting frame + connection cable