2
CUSTOM CONFIGURATION OVERVIEW
Your Savant Elite2 (“SE2”) device features Kinesis SmartSet™ driverless conguration technology so it
can be easily reprogrammed to trigger a variety of custom keyboard and/or mouse actions for each of its
available jacks. To program a custom action, simply use the on-board SmartSet application.
The SmartSet app is preloaded onto each Savant Elite2 device (both Windows and Mac versions). The app
resides on a virtual drive (v-drive™) named “KINESIS FP” which is only accessible from your computer
when the device is placed into Program Mode. No special installation is required other than the auto-install
performed by your computer when you rst activate Program Mode. This guide includes step-by-step
instructions to get started. The app also includes on-screen programming prompts and a help le.
SmartSet Configuration Application for SE2
NOTE: The SmartSet application for SE2 covers a variety of foot pedal devices and congurations. FP10J models
must be programmed through jacks 1 & 2 above; ignore the pictured pedals when conguring.
TIPS AND TROUBLESHOOTING
The KINESIS FP v-drive is only accessible when the device is placed into Program Mode. The appearance
and location of the v-drive will vary by computer and operating system. If you have trouble locating the v-
drive on your computer please refer to the User’s Manual for suggestions (link below).
For additional support:
• Click the “Help” button inside the SmartSet app for additional instructions
• Visit the SE2 support page www.kinesis.com/savant-elite2-resources/ to download the SmartSet
app or the User’s Manual, and to access Video Tutorials
• Email tech@kinesis.com
• Call 800-454-6374 (US only) or 425-402-8100 (8:30-11:30am & 12:30-4:30pm Pacic Time)
To Next Page
Loading...
Need help?
General