Need help?Do you have a question about the Kinetico 2030s and is the answer not in the manual?
General| Power Source | Non-electric |
|---|---|
| Type | Water Softener |
| Regeneration Type | Demand-initiated regeneration |
| Salt Storage Capacity | 200 lbs |
| Stages | Dual Tank System |
| Automatic | Automatic, Demand-Regeneration |
Tips for using soft water effectively, covering soap usage, skin feel, and fabric care for optimal results.
Explains Kinetico's unique countercurrent regeneration process for optimal efficiency and reduced resource usage.
Step-by-step guide for replacing the in-line filter cartridge, addressing reduced water pressure.
Instructions for refilling the salt storage tank with salt or potassium chloride, avoiding rock salt.
Procedure for manually initiating the regeneration process when salt runs out or automatically.
How to set the by-pass valve to RED (OFF), GREEN (IN SERVICE), or YELLOW (BY-PASS).
Precautionary measures to prevent damage from freezing if the unit is installed outdoors or unheated.
Procedure to sanitize the system if the inlet water supply's safety is compromised.
Using iron cleaning additives in salt or separate agents to maintain optimal system condition.
Explanation of salt bridging and methods to break it up or minimize its formation.
To Next Page
