Kinetico 2060s Installation Instructions Manual

Installation Instructions
Softening Systems
Block Salt Softeners
2020CHF
Standard Softeners
2025s
2060s
Commercial Softeners
4060s OD
Check your local building and sanitation codes for installation compliance. Installation must meet all state and local codes.
Check your water quality first. This system is not intended to be used for treating water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after the system.

Kinetico 2060s Specifications

General

Type	Water Softener
Flow Rate	12 gallons per minute
Regeneration	Demand-initiated
Resin	High-capacity cation exchange
Power Source	Non-electric
Number of Tanks	2
Stages	2