How to fix Kinetik TD1 Medical Equipment that does not switch on?
If your Kinetik Medical Equipment isn't switching on and there's no output stimulus or sensation, try these steps: * Replace the batteries. * Make sure you've inserted the batteries with the correct polarity. * Ensure the cable is firmly connected. * Remove any protective film that might be on the device.
What to do if Kinetik TD1 output stimulus is weak?
If the output stimulus or sensation from your Kinetik Medical Equipment feels weak, here's what you can do: 1. Ensure the gel pads are correctly re-attached. 2. Separate the pads and stick them to the skin again, maintaining a distance of at least 4-6 inches between them. 3. Clean the gel pads using a damp, lint-free cloth. 4. Try using a higher intensity level on the device. 5. Experiment with changing the position of the gel pads.
General| Brand | Kinetik |
|---|---|
| Model | TD1 Series |
| Category | Medical Equipment |
| Language | English |
Explains the rationale behind choosing digital pain relief methods.
Explains the mechanism of Transcutaneous Electrical Nerve Stimulation (TENS).
Identifies and describes the parts of the main TENS device.
Lists various pain conditions that can be alleviated by TENS therapy.
Lists body areas where gel pads should not be applied for safety.
Lists situations and conditions where the TENS device must not be used.
Details steps for preparing the unit, including battery insertion and cable connection.
Explains how to switch on, select channels, modes, and adjust intensity using the device controls.
Details the available programs, their settings, and intended use as shown in the table.
Explains what types of pain can be treated and offers usage cautions.
Details safety precautions for using and maintaining the device, including cleaning and storage.
To Next Page
