Kinetik TD2 Series User Manual

Kinetik TD2 Series

28 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

TD2 Series

Table of Contents

Questions and Answers:

E
egarciaAug 2, 2025
What to do if the output current stops during Kinetik TD2 therapy?
- C
  Carolyn TaylorAug 2, 2025
  If you experience the output current stopping during therapy with your Kinetik Medical Equipment, there are a few potential causes: * **Gel pads:** Ensure the gel pads are firmly attached to your skin. If they have come loose, turn off the power and re-apply them. * **Cables:** Check that all cables are properly connected. If any are disconnected, turn off the power and reconnect them. * **Battery:** The device may need recharging. Use the supplied USB cable to recharge it.
A
Anthony BlankenshipAug 18, 2025
How to treat skin redness and stabbing pain using Kinetik TD2 Medical Equipment?
- G
  gonzalezbryanAug 18, 2025
  If you experience skin redness or a stabbing pain while using the Kinetik Medical Equipment, consider the following: 1. **Intensity/Program:** Try selecting a lower intensity level or a different program. 2. **Pad Placement:** Re-position the pads. Discontinue use immediately if you feel any pain or discomfort. 3. **Gel Pad Condition:** * *Dry Pads:* Gently wipe the gel pads with a damp, lint-free cloth and re-apply. * *Dirty Pads:* Clean the gel pads using a damp, lint-free cloth. 4. **Pad Adhesion:** Make sure the pads are securely attached to your skin.

Kinetik TD2 Series Specifications

General

Brand	Kinetik
Model	TD2 Series
Category	Medical Equipment
Language	English

Summary

Introduction to TENS Pain Relief

Understanding Your Kinetik TENS Device

Device Components and Accessories

Identifies the main unit, cables, and gel pads included with the device.

Key Features of the TENS Pain Reliever

Details the device's capabilities such as channels, modes, intensities, and benefits.

Essential Safety and Warnings

Pre-Operation Safety Checklist

Crucial steps and warnings to follow before using the TENS device.

User Contraindications and Restrictions

Lists who should not use the device and specific medical conditions.

Safe Handling and Usage Instructions

Guidelines for safe operation, pad placement, and environmental considerations.

Important Health Advisories

Information on potential effects, skin sensitivity, and when to consult a doctor.

How to Use the TENS Pain Reliever

Charging the Device

Instructions on how to charge the TENS pain reliever before use.

Operating the TENS Unit

Step-by-step guide for device operation, intensity, and mode selection.

Gel Pad Application and Care

Proper methods for applying, removing, and maintaining gel pads.

Recommended Treatment Practices

Guidelines for session duration, frequency, and treatment site preparation.

Troubleshooting and Solutions

Addressing Device Power Issues

Solutions for the unit not switching on or lacking output.

Resolving Sensation and Skin Issues

Tips for weak sensations, stabbing pain, and skin redness.

Troubleshooting Connection Problems

Solutions for output stopping during therapy or cable disconnection.

Pad Placement Guide

TENS Mode Selection Details

Technical Specifications Overview

Electromagnetic Compatibility (EMC) Guidelines

Electromagnetic Emission Compliance

Declarations regarding the device's radio frequency and harmonic emissions.

Electromagnetic Immunity Standards

Information on the device's performance against electrical and magnetic interference.

RF Equipment Separation Distances

Recommended safe distances from portable and mobile RF communication devices.

Device Maintenance and Cautions

Safety Cautions for Handling and Cleaning

Important precautions for cleaning, drying, and storing the device and pads.

Understanding Device Symbols

Guarantee and Manufacturer Information

Related product manuals

Preview: Kinetik TD1 Series

Kinetik TD1 Series