Kinfine HOMEPOP K7307

Need help?

Do you have a question about the Kinfine HOMEPOP K7307 and is the answer not in the manual?

Summary

Product Introduction and Preparation

Before You Begin

Essential pre-assembly checks and recommendations for a smooth setup process.

Component Identification

Hardware Components

Detailed list of all screws, washers, and tools included for assembly.

Parts List

Identification and quantity of all furniture components required for assembly.

Assembly Instructions

Step 1: Attach Legs to Base

First assembly stage connecting legs to the main unit using specified hardware.

Step 2: Secure Legs with Hardware

Second assembly stage reinforcing leg connections with additional hardware.

Step 3: Final Adjustments and Maintenance

Final checks, including keeping the tool and tightening bolts for stability.

This manual describes the assembly and features of a HomePop armchair, style number K7307. The armchair is designed for easy home assembly and includes all necessary hardware and tools.

Function Description:

The HomePop K7307 is a single-seat armchair, likely intended for use in living rooms, bedrooms, or other areas where additional seating is desired. Its primary function is to provide comfortable and stylish seating. The design features a tufted backrest, suggesting a classic or transitional aesthetic. The assembly process is straightforward, allowing users to set up the chair without professional help.

Important Technical Specifications:

While specific dimensions and materials are not detailed in the provided pages, the hardware list gives insight into the construction. The chair uses various screws and washers for secure assembly:

Screws:
- (A) 4 x 5/16" x 60mm round hex screws
- (B) 4 x 5/16" x 50mm round hex screws
Washers:
- (C) 8 x Φ 8mm lock washers
- (D) 8 x Φ 22mm flat washers
Tool:
- (E) 1 x 5mm Ball end Hex wrench

The chair consists of the following main components:

(1) Chair cushion: 1 unit
(2) Right front leg: 1 unit
(3) Left front leg: 1 unit
(4) Right back leg: 1 unit
(5) Left back leg: 1 unit

The legs and hardware are conveniently stored under the seat, accessible by tearing open a Velcro closure.

Usage Features:

The HomePop K7307 armchair is designed for user convenience and comfort.

Easy Assembly: The manual emphasizes a simple, step-by-step assembly process, making it accessible for individuals without extensive DIY experience. The instructions are clear, with visual aids for each step.
Included Tools: A 5mm Ball end Hex wrench (E) is provided, eliminating the need for users to supply their own tools for assembly.
Adjustable Leveling Feet: The chair is equipped with adjustable leveling feet on the end cap of each of the four legs. This feature allows users to stabilize the chair on uneven surfaces, preventing wobbling and ensuring a steady seating experience.
Compact Storage of Parts: The chair legs and all hardware are cleverly stored within the chair cushion's underside, secured by Velcro. This not only simplifies packaging but also ensures all necessary components are readily available upon unboxing.

Maintenance Features:

The manual includes a key maintenance tip to ensure the longevity and stability of the armchair:

Tightening Loose Bolts: Users are reminded to keep the provided Allen wrench. Over time, due to regular use, the furniture's bolts may become loose. The manual advises using the Allen wrench to periodically tighten any loose bolts, thereby maintaining the structural integrity and safety of the chair. This proactive maintenance helps prevent potential damage and extends the product's lifespan.
Leveling: The adjustable leveling feet serve as a maintenance feature, allowing users to re-level the furniture if it becomes unstable due to floor imperfections or shifting.

Assembly Process Overview:

The assembly process is broken down into three main steps:

Step 1: Involves attaching the back legs (4 and 5) to the chair cushion (1) using four 5/16" x 60mm round hex screws (A), four Φ 8mm lock washers (C), and four Φ 22mm flat washers (D). The 5mm Ball end Hex wrench (E) is used for tightening.
Step 2: Focuses on attaching the front legs (2 and 3) to the chair cushion (1) using four 5/16" x 50mm round hex screws (B), four Φ 8mm lock washers (C), and four Φ 22mm flat washers (D). Again, the 5mm Ball end Hex wrench (E) is used.
Step 3: This final step involves leveling the furniture using the adjustable leveling feet and includes a reminder about periodic tightening of bolts.

The manual also provides important pre-assembly advice: checking for damaged or missing parts, using the carton as a working surface to prevent damage, and gathering all tools before starting. Contact information (email and phone number) is provided for ordering missing parts or service, emphasizing the need to have the style number and article number ready for efficient assistance. The overall tone of the manual is friendly and reassuring, aiming to make the assembly experience as stress-free as possible for the customer.