EasyManua.ls Logo

King Canada 8449N - User Manual

King Canada 8449N
8 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
KING CANADA
INSTRUCTION MANUAL
COPYRIGHT
©
2010
ALL
RIGHTS RESER
VED BY
KING CANADA TOOLS INC.
MODEL: 8449N
1.5 HP AIR COMPRESSOR
plusplus
performanceperformance

Table of Contents

Questions and Answers

  • T
    thomas19Aug 1, 2025
    Why is my King Canada 8449N discharging oil in the air?
    • J
      Joseph PrattAug 1, 2025
      If your King Canada Air Compressor is discharging oil in the air, it could be due to several reasons. You might have used oil with improper viscosity, in which case you should replace it with SAE30 weight non-detergent oil. Another possibility is that there's too much oil in the crankcase; drain it and refill to the correct level. Also, the compressor might be overheating because the air pressure is regulated too high. Finally, a restricted air filter could be the cause, so replace the filter.
  • B
    Brandi StoneAug 8, 2025
    What to do if my King Canada Air Compressor won't start?
    • S
      Steven Zimmerman Jr.Aug 8, 2025
      If your King Canada Air Compressor is not starting, there could be a few reasons. First, check if a fuse has blown or a circuit breaker has tripped; identify the cause and replace or reset it. Also, examine the wiring connections to ensure they are not loose. Finally, if the motor has overheated, press the reset button or wait for it to reset automatically.
  • M
    Mary TaylorAug 16, 2025
    Why is the safety valve releasing on my King Canada 8449N?
    • S
      Sandra MaldonadoAug 16, 2025
      If the safety valve on your King Canada Air Compressor is releasing, it might be due to a defective or improperly adjusted pressure switch. Check the pressure switch adjustment. If the problem continues, replace the pressure switch.
  • M
    Matthew HollowayAug 25, 2025
    How to fix low pressure on my King Canada Air Compressor?
    • J
      Joseph CantuAug 25, 2025
      If your King Canada Air Compressor has low pressure, it could be caused by a few things. There might be an air leak in the safety valve; manually check the valve by pulling upwards on the ring, and if the issue continues, replace the valve. Another cause could be a restricted air filter, so clean or replace it as needed. Lastly, a defective check valve could be the problem, in which case you should replace it.

Summary

Warranty Information

2-Year Limited Warranty

Details the 2-year limited warranty for the 1.5 HP air compressor.

King Canada Tools Warranty

Specifies the 2-year limited warranty for non-commercial use by King Canada Tools.

Limited Tool Warranty Terms

Outlines the terms, conditions, and exclusions of the limited tool warranty.

Important Safety Instructions

Risk of Explosion or Fire

Covers potential fire/explosion hazards and preventive measures for safe operation.

Risk of Bursting

Addresses tank bursting risks and necessary precautions to prevent tank failure.

Risk of Burns

Details burn hazards from hot components and provides essential safety advice.

Risk of Property Damage During Transport

Explains risks during transport and how to prevent leaks and damage to vehicles.

Specifications and Electrical Information

Technical Specifications

Lists key technical details like model, voltage, horsepower, pressure, and tank size.

Power Supply and Grounding

Covers electrical connection requirements, circuit protection, and proper grounding.

Extension Cord Usage Guidelines

Provides recommendations and specifications for using extension cords.

Assembly and Operation Controls

Assembly of the Air Compressor

Details the steps for assembling the air compressor components like mufflers and gauges.

Operating Location and Additional Controls

Advises on the ideal operating environment and explains additional regulators.

Key Operation Controls Explained

Describes the function of the compressor pump, check valve, switches, and regulator.

Operation Controls and Break-In Procedures

Compressor Gauges and Valves

Explains the function of outlet/tank gauges, drain valve, pressure release, and safety valves.

Motor Thermal Overload Protector

Describes the motor's overload protection and how to reset it.

Important Break-In Procedures

Outlines the essential steps required for the initial break-in of the compressor.

Operation, Maintenance, and Storage

Operating Procedures

Guides on preparing for use, operating the compressor, and actions after use.

Maintenance Schedule and Tasks

Details daily, monthly, and periodic maintenance checks and oil changes.

Tool Cleaning and Starting Issues

Provides advice on cleaning the tool and troubleshooting failure to start.

Storage Instructions

Outlines the steps for properly storing the air compressor.

Troubleshooting

Trouble Shooting Guide

Lists common problems, their possible causes, and corrective actions.

Parts Diagram and List Reference

Refers users to the website for the most updated parts diagram and list.

King Canada 8449N Specifications

General IconGeneral
Model8449N
Max Pressure125 PSI
Voltage120V
Weight42 lbs
Maximum Pressure125 PSI
Air Delivery @ 90 PSI2.6 CFM
CFM at 90 PSI2.6 CFM
Pump TypeOil-Free
Tank Capacity4.5 US Gallons
Tank Size4.5 US Gallons
Noise Level78 dB

Related product manuals