Need help?Do you have a question about the King Canada KC-5005R and is the answer not in the manual?
General| Type | Radial Arm Saw |
|---|---|
| Voltage | 120V |
| Blade Diameter | 10 inches |
| Max Cutting Width | 16 inches |
| Bevel Capacity | 0-45 degrees |
| Arbor Size | 5/8 inches |
| Max Cutting Depth at 90 Degrees | 3 in |
| Max Cutting Depth at 45 Degrees | 2-1/8 in |
Addresses kickbacks, push sticks, rip fence, and blade safety.
Connect to 110-120V/15-AMP circuit; avoid 2-prong adaptors.
Ensure proper grounding for shock prevention.
Use proper gauge, good condition U.L./CSA listed extension cords.
Instructions for assembling the saw's support stand.
Instructions for placing and securing the saw onto its stand.
How to remove the table insert and position the riving knife.
How to ensure the riving knife is centered with the blade.
Instructions for attaching the blade guard and anti-kickback fingers.
How to attach and adjust the rip fence.
Ensuring the rip fence is parallel to the blade for safety.
Step-by-step guide for replacing the saw blade.
To Next Page