To Next PageTo Next PageWhy is my King Canada Portable Generator overheating?
If your King Canada Portable Generator is overheating, it might be overloaded, so try reducing the load. Another possible cause is insufficient ventilation. Make sure to move the generator to an area with an adequate supply of fresh air.
What to do if King Canada Portable Generator circuit breaker keeps tripping?
If the circuit breaker on your King Canada Portable Generator repeatedly trips, it could be due to an overload. Try reducing the load. It may also be caused by faulty cords or equipment. Check for damaged, bare, or frayed wires on your equipment and replace them if necessary.
Why does King Canada Portable Generator bog down when load is connected?
If your King Canada Portable Generator engine runs well but bogs down when loads are connected, it could be due to an electrical short in the connected item. Try disconnecting the shorted load. It could also be overloaded, so try reducing the load.
What to do if King Canada KCG-15000GE Portable Generator has no AC output?
If your King Canada Portable Generator engine is running but there's no AC output, the receptacle may be faulty. Have a service center replace it. The circuit breaker might also be tripped; try resetting it. A defective capacitor may also be the cause, so have a service center replace the capacitor. Lastly, the power cord could be faulty; repair or replace the cord.
General| Brand | King Canada |
|---|---|
| Model | KCG-15000GE |
| Category | Portable Generator |
| Language | English |
Essential safety information regarding exhaust fumes, fuel handling, and hot components.
Critical warnings about connecting to building systems and using transfer switches.
Procedure for verifying and topping up the engine oil before operation.
Instructions on how to check the fuel tank and add gasoline safely.
Essential safety step to ground the generator before starting operation.
A step-by-step guide for safely starting the generator engine.
A step-by-step guide for safely shutting down the generator engine.
Guidelines for connecting electrical loads and using transfer switches to prevent backfeeding.
Detailed procedure for replacing the engine oil and oil filter.
Detailed steps for draining gasoline from the fuel tank and carburetor.
