Need help?Do you have a question about the King Industrial KC-6510g1 and is the answer not in the manual?
General| Maximum Pressure | 125 PSI |
|---|---|
| Oil Free | Yes |
| Max Pressure | 125 PSI |
| Pump Type | Oil-free |
| CFM at 40 PSI | 10.2 CFM |
| Amperage | 15 Amps |
| Noise Level | 78 dB |
| Voltage | 120V |
Contact information for service, proof of purchase, and user notes for compressor issues.
Details of the 1-year limited warranty, coverage, exclusions, and claim process.
Guidance on obtaining parts diagrams and lists from the manufacturer's website.
Preventing ignition risks from sparks, flammable vapors, and improper ventilation.
Avoiding tank rupture from rust, modifications, or exceeding pressure limits.
Caution against touching hot compressor components during or after operation.
Preventing damage and hazards from oil leaks during compressor transport.
Safe operation regarding exhaust fumes, fuel handling, and engine heat.
Warnings on refueling, sparks, tampering with settings, and inadequate ventilation.
Critical warning about toxic carbon monoxide exhaust fumes from gasoline engines.
Procedure for checking and refilling the engine oil to the correct level.
Ensuring sufficient unleaded gasoline is in the tank before operation.
Steps to inspect, clean, or replace the air cleaner filters before use.
Step-by-step instructions for safely starting the gasoline engine.
Procedure for correctly shutting down the compressor engine.
Guidelines for the initial 20 hours of operation to ensure engine longevity.
Key specifications including model, engine details, pressure, and tank size.
Crucial steps for breaking in the air compressor before service.
Information on air pressure regulators and other control components.
Details on throttle unloader, pressure gauges, regulator, safety valve, and check valve.
Instructions for using drain valves and quick connect couplers for air tools.
How to adjust the compressor's factory set cut-out pressure.
Understanding and preventing moisture buildup in compressed air systems.
Covers post-use draining, daily checks, monthly inspections, and oil changes.
Instructions for replacing and tensioning the drive belt.
Procedures for changing engine oil and recommendations for oil type.
Guidance on inspecting, cleaning, or replacing the spark plug.
Cleaning the deposit cup and fuel strainer for optimal fuel delivery.
Overview of recommended maintenance tasks based on operating hours.
Steps for preparing and storing the compressor for extended periods.
Diagnosing and correcting problems related to low air pressure output.
Identifying causes and solutions for oil appearing in the compressed air.
Troubleshooting low discharge pressure and overall insufficient output.
Resolving issues of excessive vibration and abnormal compressor knocking sounds.
Addressing problems where the compressor uses an abnormal amount of oil.
To Next Page
