King Technology Pool Frog 6100 - Replacing the Cap O-Ring; Replacing POOL FROG Cycler Knobs

22
Lubricate o-ring every couple
of months with silicone
lubricant that came with your
POOL FROG Cycler.
DO NOT USE petroleum
based lubricants.
To replace, simply unscrew old knob and replace
with the new one.
continued... POOL FROG Cycler Maintenance
S
I
L
I
C
O
N
E
L
U
B
R
I
C
A
N
T
Place new o-ring in bottom
half of groove.
Remove old o-ring.
5.
2.
1.
1.
Bottom half
of groove.
Top half of
groove.
O-ring in top
of groove
4.
3.
2.
Product # 01-22-9971
Front of
POOL
FROG
Cycler
Back of
POOL
FROG
Cycler
Roll your thumbs back and
forth over the o-ring while
pushing upward until the
o-ring falls into the top of
the groove.
Place your thumbs on each
side of the cap over the
o-ring in the groove.
Replacing Knobs
Replacing the Cap O-Ring