Need help?Do you have a question about the KING KC-12HS-VS and is the answer not in the manual?
General| Brand | KING |
|---|---|
| Model | KC-12HS-VS |
| Category | Power Tool |
| Language | English |
Keep dated proof for warranty and servicing purposes.
Parts available via authorized centers using 10-digit part numbers.
2-year limited warranty against defects in materials and workmanship.
Manual is a guide; specifications subject to change without notice.
Includes knowing tool, grounding, guards, clean area, no children, proper apparel, safety glasses.
Remove keys, use correct speed/tool, avoid overreaching, maintain tool, disconnect before servicing.
Secure bit, correct speed, keep hands clear, no freehand work, support workpiece.
Connect to 120V, 15-AMP circuit; ensure proper grounding for shock prevention.
Use correct extension cords and the removable safety key for secure operation.
Diagram identifying key components and their locations on the drill press.
Details on capacity, chuck size, swing, motor, and dimensions.
Steps to assemble the base, column, and table support structure.
Recommendation to fasten base to floor to prevent tipping during operation.
Instructions for carefully lifting and securing the drill press head onto the column.
Steps for attaching downfeed/speed handles, chuck, and arbor.
Procedure for safely removing the chuck and arbor using a drift key.
Procedure for inserting, securing, and adjusting the drill bit in the chuck.
Adjusting table height, tilt, and squaring it to the drill bit for accuracy.
Using and adjusting the dual laser guides for precise drilling point marking.
Adjusting the depth stop for repetitive drilling and changing spindle speed.
Adjusting quill play and operating the On/Off switch with safety key.
Activating laser/worklight, proper feeding, hole marking, and workpiece positioning.
Steps to inspect and replace the drive belt if stretched or damaged.
Cleaning, lubrication, waxing, and referencing online parts information.
To Next Page