Need help?Do you have a question about the KingCraft PCSD180T and is the answer not in the manual?
Maintain a clean work area, avoid explosive atmospheres, and follow electrical safety guidelines for tool use.
Ensure personal alertness, proper attire, correct tool handling, and avoid accidental starting.
Keep hands clear of the blade, maintain correct body position, and avoid reaching underneath the workpiece.
Secure workpiece, do not force tool, check switch operation, and make necessary adjustments.
Store tools properly, keep battery away from metal objects, and maintain tool cleanliness.
All service and repair must be performed by qualified personnel using identical parts.
Follow safety guidelines for chargers, including usage, handling, and charging environment.
Understand battery pack safety, avoid damage, leaks, or short circuits, and proper disposal.
Insert battery into charger, follow procedure, and adhere to optimal charging temperature and time.
Learn to change the saw blade and install it correctly with teeth pointing in the direction of rotation.
Adjust guide-plate angle, cutting depth, and rip fence for precise and safe cuts.
Align base, slide pack firmly until snap, press buttons to remove.
Switch saw on/off, apply to material, hold firmly, and use base notches for accurate sighting.
Perform regular maintenance, including replacing carbon brushes for optimal tool performance.
Charge before complete discharge, avoid overcharging, and charge at optimal room temperatures.
Understand the product warranty period, coverage, and conditions that may void the warranty.
To Next Page
General