Kingfisher FPHPC100 - Page 5

FPHPC100
Getting started...
05
GB
IE
Legal information
>Have the electric supply connection to be made
E\ D TXDOL¿HG HOHFWULFLDQ DQG LQ FRPSOLDQFH ZLWK
IEC 60364-1. It is recommended that the electric supply
to this product should include either a residual current
device that will interrupt the supply if the leakage current
to earth exceeds 30 mA for 30 ms or a device that will
prove the earth circuit.
>1HYHUXVHWKHSURGXFWZLWKLQÀDPPDEOHRUWR[LFOLTXLGV
or liquids with characteristics incompatible with its
proper operation.
>Never use the product outdoors in the rain.
>Never touch the plug and/or socket with wet hands.
>Never lock the gun trigger in the operating position.
>&KHFN WKDW WKH SURGXFW LV ¿WWHG ZLWK LWV UDWLQJ ODEHO
contact your dealer if it is missing. Products without
rating label must not be used, since they cannot be
LGHQWL¿HGDQGDUHSRWHQWLDOO\KD]DUGRXV
>Never tamper with or adjust the setting of the safety
valve or the safety devices.
>Never change the original diameter of the adjustable
nozzle.
>Never leave the product unattended when it is connected
to the power supply.
>Never move the product by pulling on the electrical
power cord.
>Do not allow vehicles to drive over the pressure hose.
>Do not move the product by pulling on the pressure
hose.
>When directed towards tyres, tyre valves or other
pressurised components, the high pressure jet is
potentially dangerous. Do not apply a jet stream and
always keep the nozzle at a distance of at least 30 cm
during cleaning.
>Protect all electrical conductors against the water jet.
5
5