06
FPHPC100
Getting started...
GB
IE
Legal information
Safety warnings
>During start-up, the product may generate interference
on the electricity supply system.
>High pressure may cause parts to rebound: wear all the
protective clothing and equipment needed to ensure the
operator’s safety.
>%HDZDUHRINLFNEDFNJULSWKHJXQ¿UPO\ZKHQSXOOLQJ
the trigger.
>Comply with the regulations of the local water supply
authority. Under EN 12729 (BA) the product can be
connected directly to the mains drinking water supply
RQO\LIWKHVXSSO\KRVHLV¿WWHGZLWKDEDFNÀRZSUHYHQWHU
device with drainage facility.
>Have maintenance and/or repair work on electrical
FRPSRQHQWVWREHFDUULHGRXWE\TXDOL¿HGVWDII
>Discharge residual pressure before disconnecting the
hose from the product.
>Check before each use, and at regular intervals, that all
metal fasteners are tight and the product’s components
DUHLQJRRGFRQGLWLRQLQVSHFWIRUEURNHQRUZRUQSDUWV
>Use only detergents compatible with the high pressure
hose / electrical power cord cladding materials.
>Connect the appliance to a water tank or a water
container located at least at 2m from the ground with
DVXFWLRQKRVHHTXLSSHGZLWKEDFNÀRZSUHYHQWHUQRW
supplied)
>In case of contact with detergents: rinse with an
abundance of clean water.
Maintenance and storage
>Disconnect the product from the power supply and
check for damage after use.
>Disconnect the product from the power supply before
carrying out maintenance or cleaning work.
6
6