Kingfisher FPPBC25-6 - Page 38

38
FPPBC25-6
In more detail . . .
Silencer
If it is necessary to adjust or replace the silencer, contact an authorised service centre
or a similarly qualied person.
Spare parts/Replacement parts
WARNING! Risk of injury! Use of nonconformant replacement components
can result in serious personal injury or death.
The following parts of this machine may be replaced by the consumer. Spare parts are
available at an authorised dealer or through our customer service.
Description Model no. or Specication
Cutting blade 4 tooth, Ø 230 x 1.8 mm
Cutting line Ø 2 mm nylon line
Spark plug TORCH L8RTC
(Gap of electrodes: 0.6-0.7 mm) or other model with
same specications
Repair
This machine does not contain any parts that can be repaired by the consumer. Contact an
authorised service centre or a similarly qualied person to have it checked and repaired.
Storage
WARNING! Risk of injury! Make sure that unauthorized persons do not have
access to the machine!
NOTE: Good storage conditions are important for keeping the machine trouble-
free.
1. Clean the machine as described above.
2. Attach transportation guards, if applicable.
3. Store the machine and its accessories in a dry, frost-free, well-ventilated place.
4. Always store the machine in a place that is inaccessible to children. The ideal storage
temperature is between 10 and 30 °C.
5. Store the machine in its bag or cover it with a suitable cloth to protect it against dust.
Care and maintenance