Kingfisher FPPBC25-6 - In More Detail; Machine Functions

25
FPPBC25-6
In more detail . . .
Intended use
This petrol brush cutter FPPBC25-6 is designated with a maximum power output of 0.8 kW.
> With the cutting blade and cutting-attachment guard attached, the machine is intended
to cut heavier weeds, brush and similar vegetation with a thickness of up to 20 mm.
> With the trimmer head and trimming guard attached, the machine is intended to cut
smaller types of weed, lawn grass or similar soft vegetation.
WARNING! The machine must be used by an experienced operator* having
read and understood the safety requirements provided within this instruction
manual using appropriate personal protective equipment (PPE)!
This machine must not be used for cutting other materials, such as plastic, stone, metal, wood
that contains foreign objects, or materials that are harmful to health. This machine should
not be used for cutting unusually thick grass or vegetation, wet grass, or shredding leaves.
For safety reasons it is essential to read the entire instruction manual before rst operation
and to observe all the instructions therein. This machine is intended for private domestic
use only, not for any commercial trade use. It must not be used for any purposes other than
those described.
* A trained operator is a person who has the competence and knowledge in the use and
hazards associated with using a machine as well as the precautions to be taken to limit
these hazards.
Safety equipment
The machine has several pieces of safety equipment which reduce the risk of injury when
working.
Cutting and trimming guard
> The guards protect the operator against thrown
objects during operation.
> For trimmer using with trimmer head (28), use
together the trimming guard (27) and cutting-
attachment guard (22); For brush cutter using with
blade, use only the cutting-attachment guard (22).
> The cutting line cutter (32) is integrated with the
trimming guard and shortens the cutting line (31) to
the necessary length (Fig. 12).
> Never use the machine without a guard nor defective guard.
18
12
32
Machine functions