6
result. Warranty is void on modified devices.
-Do not damage, process, bend, twist, stretch or heat the power cable. If the cord is
damaged, fire or electrical shock may result.
-When you are connecting other audio devices to the UC192 D2D converter make
sure that you first turn off the power to all devices to be connected. Refer to the
user’s guide for each device and use the specific cable for the connection.
-If you plan not to use the UC192 D2D converter for a long period of time (such as
when you are on vacation), remove the power plug from the AC outlet. Otherwise,
a fire could possibly result.
-If any abnormality occurs while suing the UC192 D2D converter, remove the plug
from the AC outlet. In this case first shut off the power amplifier or turn down the
volume controls and so on to avoid possibly damaging transients.
- If you notice any abnormality- such as smoke, smell, noise, etc. –remove the plug
from the AC outlet. Confirm that the abnormality is no longer present, then consult
your dealer for repair. If you continue using the UC192 D2D converter under
abnormal condition, fire or electrical shock might result.
- If a foreign object or water enters inside the equipment, remove the plug from the
AC outlet and consult your dealer for repair. If you continue using the UC192 D2D
converter under this condition, fire or electrical shock may result.
- If the power cord is damaged(for example if it is cut or if the core wire is exposed),
ask your dealer for a replacement. If you continue suing the UC192 D2D converter
under this condition, fire or electrical shock might result.
To Next Page