To Next PageTo Next Page
Need help?Do you have a question about the KINGROON KP3S PRO S1-FDM and is the answer not in the manual?
Identifies the motor responsible for X-axis movement.
Identifies the motor responsible for Y-axis movement.
Identifies the motor responsible for Z-axis movement.
Identifies the motor responsible for extruder movement.
Component that feeds filament into the hotend.
The heated surface where the print is built.
Knob used for adjusting the bed leveling.
Sensor that defines the Z-axis travel limit.
Detects the presence or absence of filament.
Switch that detects the X-axis end of travel.
Switch that detects the Y-axis end of travel.
Switch that detects the Z-axis end of travel.
Port for connecting the printer to a computer.
Slot for inserting a TF (microSD) card.
Controls preheating for nozzle and bed.
Initiates the homing sequence for all axes.
Allows manual movement control of printer axes.
Accesses the bed leveling procedure.
Provides access to printer settings and options.
Instructions for attaching the cantilever to the base.
Guidance on inserting the T8 leadscrew.
Step-by-step guide to manually level the print bed.
Instructions for loading filament into the extruder.
Process of printing files from a TF card.
Connecting via USB for direct print control.
Guide to installing the Ultimaker Cura software.
Configuring Cura to recognize the Kingroon printer.
Guidelines for a safe printing environment and usage.
Critical warnings and precautions during operation.
Routine cleaning and upkeep procedures for the printer.
General| Brand | KINGROON |
|---|---|
| Model | KP3S PRO S1-FDM |
| Category | 3D Printers |
| Language | English |
