To Next PageTo Next Page
Need help?Do you have a question about the KINGROON KLP1-FDM and is the answer not in the manual?
Guide to remove Y-axis fixing screws during assembly.
Guide to remove X-axis fixing screws during assembly.
Guide to remove Z-axis fixing screws during assembly.
Securing main boards and handle using specified screws.
Securing board 3, handle, and filament holder with screws.
Connecting printer via network cable for initial setup.
Setting up Wi-Fi connection using a USB flash drive.
Viewing IP via screen and accessing printer interface via browser/touchscreen.
Adjusting nozzle-to-bed distance manually via Z-offset.
Performing 36-point automatic bed leveling calibration.
Performing Z-offset and auto-leveling using the 12864 display.
Preheating, loading, and testing filament extrusion.
Tuning printer performance via vibration compensation and pressure advance.
Uploading files and starting print jobs from the interface.
Waiting for hot bed and nozzle to reach target temperatures before printing.
Installing and setting up Cura slicing software on a computer.
Adding KLP1 specific profiles to the Cura software.
Connecting and selecting the KLP1 printer in Cura.
Setting Cura's interface language and restarting the application.
Loading 3D models and starting the slicing process in Cura.
Saving sliced files to USB or uploading to the printer's webpage.
Precautions for safe operation, placement, and ambient conditions.
Warnings about touching hot parts and moving components during operation.
Ventilation needs for materials and daily maintenance advice.
General| Brand | KINGROON |
|---|---|
| Model | KLP1-FDM |
| Category | 3D Printers |
| Language | English |
