KINGROON KP3S PRO - Hotend Fan Pin Configuration

Instagram Printables
5.3 Change Hotend fan pin HE1
5.3.1 Marlin
File Configuration_adv.h
#define E0_AUTO_FAN_PIN PB0 //LMaker Fan HE1
5.3.2 Klipper
[heater_fan my_nozzle_fan]
pin: PB0
heater: extruder
heater_temp: 50.0
fan_speed: 1.0
shutdown_speed: 1
6. I HOPE YOU LIKE THIS MOD. ENJOY YOUR
PRINTER!!
You can buy me a coffee with a donation. Click to danate