KINGROON KP3S PRO - 3 D Printed Parts; Version Without Heat Inserts; Version With Heat Inserts; Common Parts

Instagram Printables
1.3 3D printed parts
1.3.1 Version without heat inserts
 1 unit – Back_sailfin_pro
 1 unit – Front_sailfin_pro
1.3.2 Version with heat inserts
 1 unit – Back_sailfin_inserts_pro
 1 unit – Front_ sailfin_inserts_pro
1.3.3 Common parts
 1 unit – Layer_Fan_Sailfin_pro
 1 unit – BLTouch_support_pro (Optional)
 1 unit – Inductive_support_pro (Optional)