What does U2 error mean on my KingsBottle KBU-50?
The U2 error indicates the sensor in the lower zone is short-circuit. An engineer should inspect the sensor for damage (replace if needed; it connects to the DOWN socket/plug in PCB) and check if the PCB requires repair or replacement.
How to fix the light on my KingsBottle Wine Cooler?
First, verify that the light button is in the 'ON' position. If the light still doesn't work, it's recommended to get help from an engineer.
Why is my KingsBottle Wine Cooler making so much noise?
Ensure the stand feet are properly adjusted and level to reduce noise.
What to do if the door of my KingsBottle KBU-50 will not close properly?
Check for and remove any obstructions that may be preventing the door from closing correctly.
Why is the external cabinet of my KingsBottle KBU-50 Wine Cooler so hot?
The heat is likely due to the environmental conditions in which the cooler is operating. Improving ventilation or reducing ambient temperature might help.
What does E1 error mean on my KingsBottle KBU-50?
The E1 error indicates that the temperature in the upper zone is lower than in the lower zone. This should disappear automatically as the temperature stabilizes. Wait for about one hour and check again.
Why is the cabinet of my KingsBottle Wine Cooler so hot?
If the external cabinet of your KingsBottle Wine Cooler seems too hot, it could be due to high ambient temperature or direct sunlight; improving operating conditions may help. Another possibility is a blockage in the front grill outlet or suction outlet, so remove any obstructions. Also, check if the fans are working correctly. If they stop working or operate at low speed, seek assistance from an engineer, power on the refrigerator, check the fan and whether the voltage is normal or not. If the voltage is normal, the fan should be damage.
What does U3 error mean on my KingsBottle Wine Cooler?
The U3 error signifies a short-circuit in the evaporator sensor. Have an engineer check the sensor for damage (replace if required; it's connected to the PTC socket/plug in PCB) and assess if the PCB needs repair or replacement.
What does U1 error mean on my KingsBottle KBU-50 Wine Cooler?
The U1 error means the sensor in the upper zone is short-circuit. An engineer needs to check if the sensor is damaged (replace if necessary; it's connected to the UP socket/plug in PCB) or if the PCB needs repair or replacement.
What does C2 error mean on my KingsBottle KBU-50?
The C2 error suggests that the sensor in the lower zone has an open circuit. You'll need an engineer to check if the socket/plug with the DOWN mark in PCB is badly connected, if the sensor is damaged and needs to be replaced, or if the PCB needs repair or replacement.
Provides safety precautions, warnings, and the meaning of symbols used in the manual.
Covers general installation guidelines, cutout dimensions, and model-specific measurements.
Explains how to use the control panel for temperature and light settings.
Lists common error codes and their corresponding solutions for the wine cellar.
Addresses frequent issues such as unit not operating, insufficient cooling, and noise.
General| Capacity | 50 Bottles |
|---|---|
| Cooling System | Compressor |
| Number of Shelves | 5 |
| Shelving Material | Wood |
| LED Lighting | Yes |
| Installation | Freestanding |
| Number of Zones | Single Zone |
| Noise Level | 38 dB |
| Door Material | Glass |
| Type | Freestanding |
| Temperature Range | 5°C to 18°C |
| Finish | Black |
To Next Page
