Need help?Do you have a question about the Kingst LA5016 and is the answer not in the manual?
Step-by-step guide on installing the Kingst VIS software and hardware driver.
Guide on connecting the logic analyzer to a computer via USB and driver installation.
Instructions for connecting the logic analyzer to the device under test, including grounding.
How to set sampling depth and rate for optimal data capture and time accuracy.
Explains how to set trigger conditions to start data sampling at specific signal events.
How to measure pulse width, period, duty cycle, and use timing markers.
How to use built-in analyzers to decode standard communication protocols like UART, I2C, SPI.
Detailed settings for configuring the UART, RS232, and RS485 protocol analyzers.
Configuration options for the I2C analyzer, including SDA, SCL, and address display.
Settings for the SPI analyzer, covering MOSI, MISO, CLOCK, ENABLE, and data format.
Configuration for the CAN analyzer, including channel selection and bit rate.
Settings for the simple parallel analyzer, defining channels and data latching.
Step-by-step guide on installing the Kingst VIS software and hardware driver.
Guide on connecting the logic analyzer to a computer via USB and driver installation.
Instructions for connecting the logic analyzer to the device under test, including grounding.
How to set sampling depth and rate for optimal data capture and time accuracy.
Explains how to set trigger conditions to start data sampling at specific signal events.
How to measure pulse width, period, duty cycle, and use timing markers.
How to use built-in analyzers to decode standard communication protocols like UART, I2C, SPI.
Detailed settings for configuring the UART, RS232, and RS485 protocol analyzers.
Configuration options for the I2C analyzer, including SDA, SCL, and address display.
Settings for the SPI analyzer, covering MOSI, MISO, CLOCK, ENABLE, and data format.
Configuration for the CAN analyzer, including channel selection and bit rate.
Settings for the simple parallel analyzer, defining channels and data latching.
General| Brand | Kingst |
|---|---|
| Model | LA5016 |
| Category | Measuring Instruments |
| Language | English |
To Next Page
