SMS-BPW1-A00
4
3. • Comfortably seated
• Legs uncrossed
• Feet flat on the floor
• Back and arm supported,
• Keep the device at the same level as your heart.
• Relax as much as possible and not talk during the measurement.
4. While sitting upright in a chair with your feet flat on the floor, press “START ". Symbols
“ ” on screen will increase and cuff will begin to inflate. Do not move, activate arm
muscles, or talk during measurement.
5. Measurement can be stopped at any time by pressing “STOP".
6. When the unit senses a pulse, a heart symbol will flash on screen.
7. When measurement is complete, the cuff deflates automatically and the systolic,
diastolic, and pulse rate will display on screen.
8. Turn off the device by pressing “STOP".
4. Cleaning and Maintenance
• For regular maintenance, the device only needs to be wiped gently with a soft, dry cloth
while it is not being used. Never immerse the device or any components in water.
• Do not carry out repairs of any kind yourself. If a defect occurs, please contact your local
To Next Page
Loading...
