12
V.Checking,Adjustm-ent
and Maintenance
Machine Oi
ƾThe vehicle should be checked for
machine oil before drive by sup-porting
it with the
Main stand on a flat ground.The oil
livel should be between the upper and
lower
Lines of the oil gauge. Which is not
screwed into the filling orif ice.
ƾHigh quality 4-stroke machine
oil. Class SE or SD in API classifi-
cation.of SAE15W-40 in viscosity will
help maintain a long service life or the
engine.In case those are not available,a
substitute suitable for the ambient
temperature of application should be
selected according to the table on the
right side.
Renewa
Machine oil plays a very important
role in the normal operation of the
engine and for this reason,it is necessary
to check the motorcycle for machine oil
periodically and renew the oil once
every800-1,000km of driving by the
follow ing procedures.
Remove the screw plug from the
bottom of the hot engine to drain off all
old oil.
Wash the oil filter screen clean and
remount it really to position.T hen fill in
0.8L fresh machine oil and start the
engine for idle running2-3 minutes.
Let the engine stop for 1-2 minutes
and check to see whether the oil level is
in between the upper and lower lines of
the oil gauge.
Do not use any machine oil of a
different grade than the specified one to
avoid machinery failure.
Lines of the oil gauge. Which is not
ewed into the filling orif ice.
High quality 4-stroke machine
emove the screw plug from
remount it really to position.T hen fil
ngine for idle running2-3 minutes.
et the engine stop for 1-2 minu