To Next PageTo Next Page
Need help?Do you have a question about the KINZE Manufacturing, Inc. 3660 and is the answer not in the manual?
General| Brand | KINZE Manufacturing, Inc. |
|---|---|
| Model | 3660 |
| Category | Farm Equipment |
| Language | English |
Checklist for pre-delivery service of the planter, ensuring all components are satisfactory.
Section for the owner to register planter details like name, address, and serial number.
Checklist for informing the retail customer/end user about important planter information during delivery.
Suggested checks for the equipment during the first season of use.
Definitions of safety terms used in the manual to indicate hazard levels.
Details the Kinze Limited Warranty terms, registration, and service responsibilities.
Describes planter options, configurations, and manufacturer's right to change specifications.
Specific weight and dimension details for planters with conventional hoppers.
Specific weight and dimension details for planters with bulk fill systems.
Lists hydraulic requirements for spring and PDP down force systems.
Lists hydraulic requirements for True Depth down force systems.
Provides essential safety rules for operating and maintaining the planter to prevent accidents and injuries.
Highlights common hazard warnings associated with the equipment and emphasizes paying attention to safety information.
Explains the importance of safety signs and decals and how to maintain them for operator safety.
Instructions on how to use the safety lockup device for the planter lift in storage and transport positions.
Details on installing and using the safety lockup device for row markers to prevent accidental lowering.
Explains the purpose and installation of the tongue safety pin and transport latch locking pin.
General guidance for preparing the tractor and planter for use, including safety precautions for transport.
Details the tractor-mounted PTO pump and oil cooler option for tractors with limited hydraulic output.
Information on tractor requirements and step-by-step instructions for connecting the planter.
Illustrates planter and safety chain hookup to tractor for different production years and optional 2-point hitch.
Instructions for connecting hydraulic hoses, compressor harness, and True Depth/Blue Drive connectors.
Table detailing hydraulic connections by color, machine function, hose size, and function.
Explains the vacuum system, digital and analog readouts, and valve block assembly.
Instructions for leveling the planter front-to-rear and laterally for proper operation.
Guidance on adjusting transport and field/wing wheels for proper toolbar height and field conditions.
Specific instructions for adjusting wheels when ridge planting to increase toolbar height.
Overview of the True Depth hydraulic system, including the pressure gauge and cylinder.
Instructions for replacing the filter cartridge in the True Depth system, including component identification.
Explanation of the control console functions for operating planter systems like markers, wings, and down pressure.
Covers Hall Effect sensor, Ag Leader electric clutches, and hydraulic weight transfer toolbar operation.
Summarizes and details the steps for moving the planter from transport to field position.
Guidance on operating the planter in the field, including raising/lowering and safety notices.
Discusses recommended planting speeds and outlines the sequence for moving the planter from field to transport position.
Instructions for installing safety lockup, hitch safety pin, and transport latch locking pin before transporting.
Specific steps for unfolding the planter using the Blue Vantage system, with safety notices.
Details the procedure for filling hoppers and setting system pressure for the bulk fill system.
Instructions for accessing the bulk fill entrainer and cleaning out the bulk fill tanks.
Explains the operation of the bulk fill scale package display for monitoring seed levels and settings.
Guides on how to monitor seed levels and enter seed information into the scale package display.
Describes the Ag Leader Integra, PMM, and InCommand 1200 displays for precision farming operations.
Covers Kinze ISOBUS, Auxiliary Work Lights, True Depth Display, and Blue Vantage systems.
Detailed instructions on operating the row markers using the control console and solenoid valves.
Guidance on adjusting row marker travel speed using flow control valves.
Steps for adjusting row marker lengths and blade angles for proper mark placement.
Details on adjusting row marker length for even-row units and offset hitch adjustments.
Explanation of the electric-activated clutches used to disengage planter drive on halves for finishing fields.
Describes the auxiliary hydraulic option for powering bulk seed handling equipment.
Information on the rear trailer hitch for towing wagons, including weight limits and hose management.
Procedures for performing a field test to ensure proper seed placement and checking seed population.
Formulas and guidance for determining pounds per acre and bushels per acre based on seed population.
Instructions for performing a field check to determine granular chemical application rates.
Explains the use of the metering gate for insecticide or herbicide application rates.
Details how to adjust planting depth and V-closing wheel pressure and alignment.
Instructions for adjusting drag closing attachments and covering discs/single press wheels for seed trench formation.
Information on seed hopper capacities, drive release mechanism, and extension brackets.
Guidance on proper tensioning and alignment of row unit drive chains for optimal performance.
Details on how to adjust down force springs for varying soil conditions and penetration.
Explains the pneumatic down pressure system, its components, and adjustment capabilities.
Instructions for adjusting down pressure from the cab or at the planter using the pneumatic system.
Overview of the True Depth option for on-demand hydraulic row unit down force.
Instructions for installing the True Depth console, including tractor requirements.
Wiring diagram and instructions for installing the True Depth harness components.
Details on how to lock interplant push row units in a raised position for safety and transport.
Table detailing crop, disc part numbers, cells, seed size range, and lubricant for brush-type seed meters.
Table for Brush-Type Seed Meter 2.0, detailing crop, disc part numbers, cells, seed size range, and lubricant.
Information on finger pickup seed meters, including crop selection, fingers, and lubricant.
Table detailing vacuum settings for various crops, seed discs, singulator settings, and vacuum levels.
Notes on singulator settings, seed mixing, and cleaning seed discs for vacuum meters.
Instructions on adjusting the singulator wheel for optimal meter performance based on seed characteristics.
Details on using graphite as a lubricant for seed meters to promote flow and reduce wear.
Instructions for using talc-graphite and talc lubricants, including mixing ratios for different hopper types.
Information on Bayer Fluency Agent as an alternative seed lubricant, its compatibility, and usage requirements.
Details on setting opener depth, down pressure, blade gap, and locking the opener assembly.
Adjustment procedures for notched single disc openers, including blade angle, scraper, and drop tube.
Steps for adjusting knife-to-disc contact, scraper, drop tube, and blade depth for single disc openers.
Information on residue wheel attachments and depth/gauge wheel attachments for notched single disc openers.
Details on placement, blade depth, down pressure adjustment, and lockup for HD single disc openers.
Procedures for adjusting HD single disc openers and locking them up for storage.
Information on the liquid fertilizer attachment, including check valves and safety precautions.
Details on piston pump operation, delivery rate adjustment, ground drive wheel spring adjustment, and cleaning.
Table showing application rates in gallons per acre for the NGP-6055 Piston Pump.
General notes on planting rates, seed additives, and speed effects on seed spacing.
Details on mechanical seed metering for corn and sunflower crops, including finger pickup meters.
Rate charts and calculations for wheat discs using hydraulic or electric drive, including SDS/REV and population calculations.
Tables showing planting rates for brush-type seed meters for Rye and Wheat, including sprocket combinations.
Provides formulas and a worksheet for calculating seeds per gram, grams per revolution, and planting rates.
Guidance on finding population factors and selecting correct transmission sprockets based on calculated rates.
Tables showing planting rates for vacuum wheat seed meters with 54 cell discs.
Continues planting rate tables for vacuum wheat seed meters, including sigulator settings.
Step-by-step guide on using the provided tables and formulas to determine planting rates.
An example demonstrating the calculation process using the worksheet tables to determine planting rates.
Explains lubrication symbols and procedures for maintaining sealed and wheel bearings.
Instructions for lubricating transmission and drive chains daily to ensure proper operation and minimize wear.
Guidance on lubricating bushings at indicated frequencies and checking bolt torque.
Instructions for lubricating U-joint slides daily and checking the crankcase oil level for the liquid fertilizer piston pump.
Details on cleaning, greasing PTO shaft couplings and lubricating the planter-mounted PTO pump driveline.
Illustrates and lists locations of grease fittings on the planter, indicating lubrication frequencies.
Continues the list and illustration of grease fitting locations, including wing wheel pivots, lift cylinders, and U-joints.
Lists more grease fitting locations such as row marker breakaways, rotate cylinders, transport wheel bearings, and fertilizer openers.
Provides a torque chart for various bolt sizes and grades, emphasizing checking hardware tightness.
Emphasizes tire pressure maintenance and provides inflation specifications for transport and ground drive tires.
Instructions for draining reservoir, changing filter, filling fluid, and checking oil coolers for the planter-mounted PTO pump.
Procedures for draining reservoir, cleaning strainer, changing filter, and filling fluid for the tractor-driven PTO pump.
Detailed steps for inspecting and adjusting finger pickup seed meters, including cleaning and checking finger operation.
Guidance on maintaining brush-type seed meters, including seed disc wear and stainless steel wear band replacement.
Procedures for inspecting, cleaning, and cleaning out vacuum seed meters for optimal performance.
Instructions for inspecting drag closing attachments and adjusting gauge wheels for proper opener blade contact.
Detailed steps for replacing gauge wheel arm bushings, seals, and pivot spindles.
Guidance on maintaining proper blade-to-blade contact and replacing disc blades or bearings for 15" openers.
Procedures for replacing the entire disc blade/bearing assembly or just the bearing itself.
Instructions for seed tube guard replacement, coulter adjustment, and residue wheel mounting.
Guidance on lubricating bushings and checking hardware for disc furrowers, bed levelers, and no till coulters.
Information on spiked closing wheels, residue wheels, and preparing the granular chemical attachment for storage.
Lubrication and storage procedures for GFX hydraulic row cleaners and spring tooth incorporators.
Explains the function and maintenance of check valves, flow control valves, pressure relief valves, and relief valve cartridges.
Describes solenoid valve operation and proportional pressure relief valves used in the True Depth system.
Step-by-step guide for lubricating or replacing row marker bearings.
Instructions for adjusting row marker transport stands and repacking/replacing wheel bearings.
Procedures for inspecting wear pads and adjusting rockshaft to hitch shims for proper frame alignment.
Detailed steps for adjusting center frame wear pads and relating it to the inner hitch for alignment.
Steps for triangulating the planter frame and setting squareness to ensure correct tracking during operation.
Instructions for measuring and installing the rotation stop block and shims for proper planter frame rotation.
Procedures for inspecting and adjusting the rotation cylinder mount and draining the air compressor tank.
Steps for cleaning and repairing fertilizer check valves and preparing the piston pump for storage.
Comprehensive guide for preparing the planter for storage, including cleaning, lubrication, and component removal.
Wiring diagram for the planter's light package, including connections for flashers and work lights.
Schematic of the electrical control console, showing wiring connections for various planter functions.
Wiring schematic for the electrical harness connecting to the tractor, detailing pin assignments.
Wiring schematic for the electrical harness on the planter, showing connections to valve blocks and components.
Diagram and pin/port assignments for the valve block located on the planter hitch.
Hydraulic schematic illustrating the system for 16-row planters with two wing lift cylinders per wing.
Continues the hydraulic schematic, showing components like main lift cylinders and edgevac systems.
Hydraulic schematic showing wing lock, marker cylinders, and down pressure cylinder connections.
Hydraulic schematics for the vacuum fan motor system, with and without the bulk fill system.
Hydraulic schematic for the optional tractor-driven PTO pump and oil cooler system.
Hydraulic schematic for the optional planter-mounted PTO pump drive and oil cooler system.
Wiring schematic for the electric clutch system, showing connections to adapter cables and modules.
Details on ISOBUS implement cable signals and wiring, and the ISOBUS CAN jumper cable connections.
Wiring information for the product control module cable, detailing connections to various components.
Wiring schematic for the implement switch extension cable, showing connections to sensors and modules.
Wiring schematics for section adapter cables, detailing connections for 12-row and 16-row planters.
Wiring schematic and table for the clutch cable on a 12-row planter, showing signal and row connections.
Wiring schematic and table for the clutch cable on a 16-row planter, showing signal and row connections.
Wiring diagram showing the interconnect for the True Depth system, including tractor and planter components.
Hydraulic schematic of the main down force valve block for the True Depth option.
Hydraulic schematic illustrating the True Depth system for push units 1 through 8.
Hydraulic schematic illustrating the True Depth system for push units 9 through 15.
Hydraulic schematic illustrating the True Depth system for row units 1 through 8.
Hydraulic schematic illustrating the True Depth system for row units 9 through 16.
Hydraulic schematic for the True Depth option utilizing an SCV input.
Hydraulic schematic for the True Depth option using a battery pack input.
Hydraulic schematic for the True Depth option using a bulk fill input.
Hydraulic schematic for the True Depth option with an even row setup.
Lists common issues with the bulk fill system and their potential causes and solutions.
Addresses problems with closing wheels, such as imprint depth and soil firming, with solutions.
Troubleshooting guide for GFX hydraulic row cleaners, covering pressure issues and flow rates.
Addresses issues with the planter lift circuit, including wing raising speed and cylinder retraction problems.
Solves issues with the rotation circuit, including cylinder extension and retraction problems.
Troubleshooting for piston pump priming, metering, leaks, and PTO pump drive/oil cooler problems.
Solves issues with row marker operation, including marker lowering and raising.
Addresses low seed count, spacing issues, and high counts for brush-type seed meters.
Troubleshooting for vacuum seed meters, covering low seed count, poor spacing, and vacuum level issues.
Troubleshooting guide for finger pickup seed meters, covering issues like one row not planting, skipping, and spacing variations.
