To Next PageTo Next Page
Need help?Do you have a question about the KINZE Manufacturing, Inc. 3700 and is the answer not in the manual?
General| Brand | KINZE Manufacturing, Inc. |
|---|---|
| Model | 3700 |
| Category | Farm Equipment |
| Language | English |
Locating and recording the serial number plate for identification purposes.
Welcome message and definitions of safety signal words: DANGER, WARNING, CAUTION, NOTICE.
Details on the Kinze Limited Warranty and registration requirements for service.
Overview of planter configurations, terminology, and general product details.
Detailed specifications including dimensions, capacity, and tire sizes for the Model 3700.
Hydraulic system requirements for tractors based on planter configuration and options.
Comprehensive safety rules covering operation, maintenance, and hazards.
Common hazard warnings and critical safety measures for operating the equipment.
Importance of keeping safety signs clean, visible, and in good condition.
Procedures for engaging and storing safety lockup devices for lift and row markers.
Operation and safety procedures for hitch linkage lockup and the 2-speed jack.
General guidance for preparing the planter for use, including tire inflation and torque.
Requirements for tractor hydraulics, control consoles, and connection procedures.
Guidance for properly connecting hydraulic hoses to tractor ports.
Instructions for installing the PTO pump and connecting electrical connectors.
Safety warnings and guidelines for transporting the planter on public roads.
Detailed specifications and information regarding planter cylinders and hydraulic hoses.
Procedures for leveling the planter and adjusting contact wheel springs.
Details on contact wheel drive sprockets and seed rate transmission adjustments.
Operation of wrap spring wrenches and the function of shear pins.
Information on hitch linkage, vacuum gauge, and initial PTO pump startup.
Overview of planter controls, hydraulic functions, and electrical operations.
Step-by-step procedure to transition the planter from transport to field operation.
Step-by-step procedure to transition the planter from field to transport position.
How to operate, adjust speed, chain, and length of row markers.
Description of the vacuum system, including fan valve block and analog gauge.
Information on Ag Leader Integra, PMM, and InCommand 1200 displays.
Explanation of single and two-speed point row clutch operation and control.
Information on piston pump operation, check valves, and liquid fertilizer systems.
Essential field tests for seed population, chemical application, and planter level.
Details on planting depth, closing wheels, seed meters (brush, finger, vacuum).
Information on seed hoppers, drive release, extension brackets, and chains.
Details on adjusting quick adjustable down force springs for optimal planting.
Explanation and operation of the pneumatic down pressure system.
Details on brush-type and finger pickup seed meters and lubrication requirements.
Vacuum settings for crops and procedures for seed meter maintenance and cleanout.
Details on frame-mounted coulters, disc furrowers, and residue wheels.
Information on granular chemical hoppers, incorporators, and banding options.
Guidelines for selecting correct sprockets and making field checks for planting rates.
Approximate seeds per hectare for finger pickup meters with various drive sprockets.
Approximate seeds per hectare for brush-type meters with various drive sprockets.
Vacuum planting rates for corn/sunflower with 15-tooth drive sprockets.
Vacuum planting rates for milo/sugar beet/specialty with 22-tooth drive sprockets.
Application rates in liters per hectare for liquid fertilizer piston pumps.
Approximate application rates in kg/hectare for dry insecticides at 8 km/h.
Approximate application rates in kg/hectare for dry herbicides at 8 km/h.
Explanation of lubrication symbols and information on sealed bearings.
Instructions for lubricating all transmission and drive chains daily.
Lubricating bushings and inspecting the sliding hitch linkage.
Maintenance for PTO shaft coupling and wrap spring wrench assembly.
Checking and maintaining the liquid fertilizer piston pump crankcase oil level.
Locations and frequencies for greasing fittings on the planter.
Importance of checking hardware tightness and torque values for assembly.
Safety information for transport tires and their inflation specifications.
Inspection and adjustment procedures for finger pickup seed meters.
Maintenance procedures for brush-type seed meters, including seed disc wear.
Procedures for maintaining and cleaning vacuum seed meters.
How to adjust gauge wheels and replace arm bushings/seals.
Proper blade clearance and maintenance for seed opener disc assemblies.
Maintenance for seed tube guards and frame-mounted coulters.
Lubrication and maintenance for disc furrowers and residue wheels.
Maintenance for no-till coulters and coulter-mounted residue wheels.
Preparing granular chemical attachment and spring tooth incorporators for storage.
Maintenance procedures for single and two-speed point row clutches.
How to test clutch operation and replace fuses in the control console.
Maintenance for pump drive/oil cooler and adjusting the digital vacuum gauge.
Information on check valves, detent lever, flow control, and pressure relief valves.
Information on solenoid valves, stroke limiter valve, and chain tension adjustment.
Procedure for adjusting the stroke limiter valve for correct toolbar height.
Procedure for adjusting the detent lever valve for proper lowering sequence.
Lubrication or replacement procedures for row marker bearings.
Procedures for repacking or replacing lift/ground drive wheel bearings.
Procedure for replacing transport wheel bearings.
Cleaning fertilizer check valves and storing the piston pump and fertilizer system.
Comprehensive steps for preparing the planter for off-season storage.
Wiring diagram illustrating the planter's light package connections.
Schematic diagram of the electrical control console and its functions.
Wiring schematic showing harness connections on the tractor.
Wiring schematic showing harness connections on the planter.
Wiring diagrams for valve blocks located on the hitch, tower, and R.H. wing.
Schematic diagram for the optional two-speed point row clutch control console.
Wiring schematic for the vacuum fan control system.
Best practices for storing hydraulic hoses to ensure longevity and prevent failure.
Hydraulic schematic illustrating the vacuum fan system for the 24 Row 70 CM planter.
Detailed hydraulic system schematics for the 24 Row 70 CM planter.
Diagrams showing the locations of hydraulic valve blocks on the planter.
Explanation of the function of each identified hydraulic valve assembly.
Common issues with closing wheels and their solutions.
Common issues related to the lift circuit and possible solutions.
Common problems encountered with the piston pump and their resolutions.
Common issues with the stroke limiter valve and troubleshooting steps.
Common problems with point row clutches and solutions.
Troubleshooting for PTO pump/oil cooler and row marker operation issues.
Common problems and solutions for brush-type seed meters.
Common problems and solutions related to solenoid valves.
Common problems and solutions for vacuum seed meters.
Common problems and solutions for finger pickup seed meters.
