Kioti CK20H User Manual

TO THE READER
1
S196-WOO Jul. 2003
TO THE READER
This Workshop Manual has been prepared to provide servicing personnel with information on the mechanism,
service and maintenance of KIOTI tractors CH20, CK20J, CK20H and CK20HJ. It is divided into two parts, “Mecha-
nism” and “Servicing” for each section.


 MECHANISM
Information on the construction and functions are included. The part should be completely understood before
proceeding with troubleshooting, disassembling or servicing.


 SERVICING
In this section you will find general precautions, maintenance and special tools. The are other sections which
include troubleshooting, servicing, specifications lists, disassembling, assembling and servicing that explains in
detail procedures, precautions, factory specifications and acceptable limits.
This manual contains the latest production information on illustrations and specifications based on the most up to
date production information available at the time of publication.
We reserve the right to make changes throughout the entire manual at any time without notice.

Kioti CK20H Specifications

General

Engine Type	Diesel
Engine Power	20 hp
Drive	4WD
Engine Cylinder	3
Three-Point Hitch	Category I
PTO Speed	540 rpm
Transmission	Hydrostatic
Fuel Capacity	6.6 gallons

Summary

SAFETY FIRST

SIGNS

Explanation of industry safety alert symbols and their meanings.

BEFORE SERVICING AND REPAIRING

Essential steps to take before commencing servicing or repairs.

SAFETY STARTING

Procedures for safely starting the tractor engine.

SAFETY WORKING

Guidelines for safe operation and performing work on the machine.

AVOID FIRES

Precautions and procedures to prevent fires during operation or maintenance.

VENTILATE WORK AREA

PREVENT ACID BURNS

DISPOSE OF FLUIDS PROPERLY

PREPARE FOR EMERGENCIES

CHAPTER 1 GENERAL

5. SPECIFICATIONS

Detailed technical specifications for the tractor models.

6. LUBRICANTS, FUEL AND COOLANT

Information on recommended lubricants, fuel types, and coolant.

7. TIGHTENING TORQUES

Specifications for tightening various screws, bolts, and nuts.

7.1 GENERAL USE SCREWS, BOLTS AND NUTS

7.2 STUD BOLTS

7.3 AMERICAN STANDARD SCREWS, BOLTS AND NUTS WITH UNC OR UNF THREADS

8. MAINTENANCE CHECK LIST

A comprehensive schedule for regular maintenance tasks based on time or usage.

9. CHECK AND MAINIENANCE

Procedures for routine checks and maintenance of the tractor.

9.1 DAILY CHECK

Daily inspection procedures to ensure safe operation and machine longevity.

B. CHECKING ENGINE OIL LEVEL

C. CHECKING COOLANT LEVEL

9.2 EVERY 50 HOURS

Maintenance tasks to be performed every 50 hours of operation.

9.3 EVERY 100 HOURS

Maintenance tasks to be performed every 100 hours of operation.

9.4 EVERY 200 HOURS

Maintenance tasks to be performed every 200 hours of operation.

9.5 EVERY 400 HOURS

Maintenance tasks to be performed every 400 hours of operation.

9.6 EVERY 600 HOURS

9.7 EVERY 800 HOURS

9.8 EVERY 1 YEAR

9.9 EVERY 2 YEAR

9.10 SERVICE AS REQUIRED

10.1 INFLATION PRESSURE