To Next PageTo Next Page
Need help?Do you have a question about the Kioti DK4210(C)HSE and is the answer not in the manual?
Indicates conditions that may result in harm or death.
Indicates conditions that may result in vehicle damage.
Emphasizes notable characteristics or technology for easier operation.
Indicates interesting or helpful information.
Steps and guidelines before operating the tractor.
Safety measures to follow while operating the tractor.
Safety measures for maintenance and repair.
Specific safety guidelines for loader operations.
Information on maintaining safety decals on the tractor.
General safety guidelines for safe operation.
Guidance on proper operation and service by trained personnel.
Guidelines for using ROPS and CAB with seat belts.
Safe method for mounting and dismounting the tractor.
Precautions for operating the tractor cabin, especially for chemical proofing.
Safety measures for parking the tractor on inclines.
Importance of proper ventilation when operating in enclosed buildings.
Safety guidelines for towing and using the hitch.
Safe usage of drawbars and trailers, including loading limits.
Proper use of ballast for stability and safe loading practices.
Managing front-end weight to prevent tipping.
Using proper ballast and understanding implement limitations.
Safety measures for operating implements and avoiding hazards.
Safe driving techniques on inclines.
Proper use of brakes and avoiding freewheeling.
Safe turning practices at various speeds.
Observing traffic rules and using SMV signs.
Safety measures for towing other equipment.
Safety guidelines for operating the Power Take-Off system.
Safe procedures for lifting the tractor for servicing.
Precautions when working with the tractor's electrical components.
Safe practices for tire mounting and pressure.
Warnings related to hydraulic fluid leaks.
Safety checks before pressurizing the hydraulic system.
Proper disposal of fluids and waste for environmental safety.
General safety rules for operating the loader.
Continued safety guidelines for loader use, including load limits.
Warning about contacting power lines with loader arms.
Keeping bystanders away and warning about ROPS vs FOPS.
Diagram showing locations of safety decals on ROPS.
Diagram showing locations of safety decals on the cabin.
Details of warning decal for flammables.
Details of danger decal for starting engine directly.
Details of warning decal for brake pedal interlock.
Warning about opening hot radiator cap.
Warning decal for operating in poorly ventilated areas.
Warning decal for emissions and muffler contact.
Warning decal for PTO operation safety.
Warning decal for preventing implement accidents.
Instructions for cleaning and maintaining safety decals.
Information on identifying the tractor, engine, and transmission numbers.
List of necessary replacement parts for maintenance.
Location and format of the tractor's serial number.
Location and format of the engine serial number.
Location and format of the transmission number.
Fields for recording tractor model and serial numbers.
Fields for recording engine serial number and purchase date.
Specifications for various oils and fluids used in the tractor.
Information on filters for engine, transmission, and air cleaner.
Maintenance and replacement of belts and rubber parts.
Battery maintenance and checks.
Overview of general specifications and dimensions.
Table detailing tractor's driving speeds.
Information on maximum allowable implements for the tractor.
Detailed external dimensions of the ROPS model tractor.
Detailed external dimensions of the CABIN model tractor.
Specifications related to drive train, brake, and differential lock.
Agricultural and industrial tire size specifications.
Details on pump capacity, steering, and lift control.
Rear PTO type, speed, and turning radius.
Weight and load limits for the draw-bar.
Emission certificate number and CO2 values.
Table of maximum width/depth for various implements.
Visual identification of external tractor components.
Overview and location of various switches on the tractor.
Description of symbols and gauges on the instrument panel.
Explanation of how to operate the tractor's controls.
Operation and function of the differential lock pedal.
Components and features within the tractor cabin.
Diagram identifying external components on the ROPS model.
Diagram identifying external components on the CABIN model.
Location of switches on the ROPS model's control panel.
Location of switches on the CABIN model's control panel.
Operation of the headlight switch for beam control.
Operation of the horn switch.
Operation of the hazard lamp switch for warnings.
Identification and function of instrument panel symbols and gauges.
Indicates the engine speed for efficient PTO operation.
Indicates the remaining fuel level in the tank.
Operation of the turn signal indicator lamps.
Indicates when carbon accumulation requires regeneration.
Stage 1 warning for DPF clogging, requiring manual regeneration.
Stage 2 warning for DPF clogging, requiring manual regeneration.
Stage 3 warning for DPF clogging, indicating potential replacement.
Indicates the PTO engagement condition.
Warns when engine oil pressure or level is low.
Indicates when the parking brake is actuated.
Indicates the current condition of the engine.
Identification of controls on the ROPS model.
Identification of controls in the CABIN model.
Proper use of brake pedals, including interlock.
Operation of HST pedals for driving direction and speed.
How to adjust the steering wheel angle and position.
Procedures for adjusting the seat position and sliding.
How to adjust the seat height using the handle.
How to adjust cushion firmness using the lever.
Controls the height of the 3-point hitch lifting arm.
Controls auxiliary hydraulic implements installed to the rear.
Operation of the 4WD lever for traction.
Identification of interior cabin components like lamps and vents.
Procedure for opening the cabin door.
Location and operation of front and rear working lights.
Operation of the cabin's interior light.
Use of the external power source socket.
Location of storage areas and cup holders in the cabin.
Function and use of the sun visor.
Procedure for opening emergency exits via the rear window.
How to activate and deactivate the air conditioner.
Controls airflow direction from cabin vents.
Operation of the defrost function for cabin windows.
Adjusts cabin temperature by controlling airflow.
Guidelines for operating the AC during winter.
How to clean and maintain the AC condenser.
Function and connection of the optional 7-pin socket.
Safety warnings for tire disassembly and assembly.
Importance of tire pressure and rim safety.
Adjusting tire tread for crop rows and slopes.
Warnings about loose rims, wheels, or axles.
Front wheel installation pattern and torque specifications.
Rear tire specs and wheel bolt/nut torque values.
Guidelines for adding front weight for stability.
Routine checks before starting the tractor.
Procedures for starting, stopping, and warming up the engine.
General guidance on how to drive and operate the tractor.
Guidance for operating a new tractor during its initial period.
Recommendations for breaking in the new tractor.
Step-by-step instructions for starting the tractor engine.
How to use the range shift lever for speed selection.
Safe operation of the PTO switch.
Functions of the key switch in different positions.
Checking warning lamps after starting the engine.
Procedures for safely stopping the tractor engine.
Basic steps for driving the tractor, including seat and seat belt.
Ensuring brake pedals are interlocked for safety.
Procedure for lifting implements using the position control lever.
How to release the parking brake.
Changing range shift lever positions.
Safe driving practices on slopes.
Safety measures for road driving, including turn signals.
Operation of double-acting hydraulic levers.
Procedures for connecting and disconnecting implements.
Steps for removing and installing 3-point hitch implements.
Adjustments for lift rod, top link, and check link.
General information on operating the tractor loader.
How to adjust the top link for implement angle.
How to adjust check link for sway control.
How to adjust the lift rod for implement balance.
Adjusting top link length and lock nut.
Adjusting check chain for sway and centering.
Specifications and safe use of drawbars and trailers.
Operation of the loader joystick controls.
Operation of bucket roll back and dump functions.
Functionality of the float mode for the loader boom.
Explanation of the regen function for fast dumping.
Simultaneous lowering and rolling back of the boom.
Simultaneous lowering and dumping of the boom.
Lifting and rolling back the boom simultaneously.
Lifting and dumping the boom simultaneously.
How to lock and unlock the joystick lever for safety.
Identification and function of hydraulic block components.
List of items for routine maintenance checks.
Information on lubricants required for the tractor.
Explanation of maintenance codes used in the schedule.
Specific items for daily inspection and service.
Steps for safely opening and closing the tractor hood.
How to clean the radiator grill and screen.
Inspecting instrument panel gauges and indicators.
Inspecting external lights for damage.
Checking the condition of the seat belt and cabin.
Procedure for draining water from the fuel filter.
Steps for removing and replacing the fuel filter.
Safety guidelines for handling and maintaining the battery.
Procedures for charging the tractor battery.
Inspection of intake air lines and hose clamps for damage.
Inspection of radiator hoses and clamps for damage.
Procedure for adjusting the front axle pivot pin.
Steps for replacing the air cleaner filter.
Diagram showing fuse capacity and location.
General guidelines for storing the tractor.
Information on proper usage and disposal of the tractor.
Recommendations for daily cleaning and storage.
Procedures for storing the tractor for extended periods.
Common engine issues and their solutions.
General tractor problems and their countermeasures.
General
