1-4 DK451/501/551
The ROPS and Cabin should never be
modified by welding, grinding or cutting,
as this can weaken the structure. If any
components is damaged, it must be
replaced.
If the ROPS unit is removed or loosened
for any reason, the parts should be fitted
back to their original positions and all bolts
should be properly torqued.
NOTE
Always use seat belt when the tractor
is equipped with a ROPS and CABIN.
Never use the seat belt when tractor
is not equipped with a ROPS and
CABIN.
21.Extra caution should be taken when
driving tractors with narrow tread
widths. For added stability you should
adjust your rear wheel tread width, see
page 8-3.
19.Before starting your tractor you
should depress the clutch and make
sure that all shift levers are in the
neutral position.
20.For your safety ROPS with a seat belt
is recommended for most applications.
(1) Tread
A12O106A
A12O107A
To Next Page
Loading...
