To Next PageTo Next Page
Need help?Do you have a question about the Kioti K9 2440 and is the answer not in the manual?
General| Brand | Kioti |
|---|---|
| Model | K9 2440 |
| Category | 3D Glasses |
| Language | English |
Key steps to ensure safety before beginning any maintenance or repair work on the vehicle.
Rules and best practices for safe operation and maintenance of the vehicle, emphasizing personal and equipment safety.
Environmental guidelines for the correct disposal of operational fluids to prevent pollution.
Steps to ensure the vehicle is safely positioned and secured before starting the windshield installation process.
Attaching the upper frame stays to the ROPS front frame using specified bolts.
Connecting the upper and lower frame assemblies to the previously installed upper frame stays.
Optional step to create a hole in the instrument panel using a hole cutter for specific components.
Installing grommets, collars, cushions, and the wiper motor bracket onto the windshield assembly.
Mounting the wiper motor onto its designated bracket on the windshield assembly.
Attaching hinge brackets to the glass using cushion bolts, packing, and flange nuts.
Securing side glass grips to the lower glass section using collars, cushions, and screws.
Fastening hinge brackets to the ROPS frame and securing side glass grips with pins and snap rings.
Connecting the window brush and washer hose to the wiper arm, then mounting the arm to the motor shaft.
Connecting the wiper wire harness to the motor and securing it along with the washer hose.
Attaching the wiper motor cover and wire harness cover using screws and flange bolts.
Directing wiring and washer fluid hose to the washer tank and making connections.
Attaching the washer liquid tank and its bracket to the vehicle's main frame.
Connecting the micro relay to the designated relay box located in the vehicle's hood.
Connecting the main vehicle wire harness and installing the motor switch assembly.
Attaching the lower cover weather strip and securing the lower frame assembly with screws and caps.
